1
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Treiber 190616 Verbindungsabbrüche
« am: Juni 18, 2019, 07:27:03 Vormittag »
Seit dem Update auf die Treiber Version 190616 verliert der SkyTV 8 direkt nach dem einschalten des Streams über TVHeadend die Verbindung.
Wie kann ich eine ältere Version des Treibers unter Kodi installieren?
Wie kann ich eine ältere Version des Treibers unter Kodi installieren?
Code: [Auswählen]
[ 249.837144@3] usb 1-2: Product: eLight
[ 249.837146@3] usb 1-2: Manufacturer: Sundtek
[ 249.837148@3] usb 1-2: SerialNumber: U190406135620
[ 249.869223@3] usb 1-2: Unsupported device
[ 251.883264@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 251.883348@3] usb 1-2: USB disconnect, device number 104
[ 252.131267@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 252.191196@3] usb 1-2: new high-speed USB device number 105 using xhci-hcd
[ 252.309382@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 252.311206@3] usb 1-2: Device not responding to setup address.
[ 252.519099@3] usb 1-2: Device not responding to setup address.
[ 252.727016@3] usb 1-2: device not accepting address 105, error -71
[ 252.994999@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 253.054949@3] usb 1-2: new high-speed USB device number 106 using xhci-hcd
[ 253.200194@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 253.200199@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 253.200201@3] usb 1-2: Product: eLight
[ 253.200203@3] usb 1-2: Manufacturer: Sundtek
[ 253.200205@3] usb 1-2: SerialNumber: U190406135620
[ 253.229271@3] usb 1-2: Unsupported device
[ 253.841137@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 253.841213@3] usb 1-2: USB disconnect, device number 106
[ 254.070678@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 254.130643@3] usb 1-2: new high-speed USB device number 107 using xhci-hcd
[ 254.271856@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 254.271861@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 254.271863@3] usb 1-2: Product: eLight
[ 254.271865@3] usb 1-2: Manufacturer: Sundtek
[ 254.271866@3] usb 1-2: SerialNumber: U190406135620
[ 254.285214@3] usb 1-2: Unsupported device
[ 254.801513@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 254.801578@3] usb 1-2: USB disconnect, device number 107
[ 255.030661@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 255.042761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 255.090355@3] usb 1-2: new high-speed USB device number 108 using xhci-hcd
[ 255.358285@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 255.418252@3] usb 1-2: device descriptor read/64, error -71
[ 255.469622@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 255.794121@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 255.854105@3] usb 1-2: device descriptor read/64, error -71
[ 256.082024@3] usb 1-2: new high-speed USB device number 109 using xhci-hcd
[ 256.223256@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 256.223259@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 256.223261@3] usb 1-2: Product: eLight
[ 256.223263@3] usb 1-2: Manufacturer: Sundtek
[ 256.223264@3] usb 1-2: SerialNumber: U190406135620
[ 256.237216@3] usb 1-2: Unsupported device
[ 256.905389@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 256.905462@3] usb 1-2: USB disconnect, device number 109
[ 257.109803@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 257.169753@3] usb 1-2: new high-speed USB device number 110 using xhci-hcd
[ 257.310987@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 257.310993@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 257.310995@3] usb 1-2: Product: eLight
[ 257.310996@3] usb 1-2: Manufacturer: Sundtek
[ 257.310998@3] usb 1-2: SerialNumber: U190406135620
[ 257.325212@3] usb 1-2: Unsupported device
[ 257.413763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 257.413826@3] usb 1-2: USB disconnect, device number 110
[ 257.625630@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 257.685584@3] usb 1-2: new high-speed USB device number 111 using xhci-hcd
[ 257.827073@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 257.827078@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 257.827080@3] usb 1-2: Product: eLight
[ 257.827082@3] usb 1-2: Manufacturer: Sundtek
[ 257.827083@3] usb 1-2: SerialNumber: U190406135620
[ 257.837285@3] usb 1-2: Unsupported device
[ 257.961764@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 257.961823@3] usb 1-2: USB disconnect, device number 111
[ 258.169484@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 258.229417@3] usb 1-2: new high-speed USB device number 112 using xhci-hcd
[ 258.362010@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 258.373546@3] usb 1-2: device descriptor read/all, error -71
[ 258.641309@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 258.701266@3] usb 1-2: new high-speed USB device number 113 using xhci-hcd
[ 258.842529@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 258.842533@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 258.842535@3] usb 1-2: Product: eLight
[ 258.842537@3] usb 1-2: Manufacturer: Sundtek
[ 258.842538@3] usb 1-2: SerialNumber: U190406135620
[ 258.848623@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 258.893013@3] usb 1-2: can't set config #1, error -71
[ 258.893091@3] usb 1-2: USB disconnect, device number 113
[ 259.097204@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 259.153763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 259.157147@3] usb 1-2: new high-speed USB device number 114 using xhci-hcd
[ 259.425073@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 259.485055@3] usb 1-2: device descriptor read/64, error -71
[ 259.717497@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 259.733165@3] usb 1-2: device descriptor read/all, error -71
[ 259.733199@3] xhci-hcd xhci-hcd.0.auto: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[ 259.733202@3] xhci-hcd xhci-hcd.0.auto: ep deq seg = ffffffc09a3a10c0, deq ptr = ffffff800883b150
[ 260.000892@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 260.060865@3] usb 1-2: new high-speed USB device number 115 using xhci-hcd
[ 260.202131@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 260.202134@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 260.202137@3] usb 1-2: Product: eLight
[ 260.202138@3] usb 1-2: Manufacturer: Sundtek
[ 260.202140@3] usb 1-2: SerialNumber: U190406135620
[ 260.205247@3] usb 1-2: Unsupported device
[ 260.255263@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 260.255763@3] usb 1-2: USB disconnect, device number 115
[ 260.480798@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 260.544740@3] usb 1-2: new high-speed USB device number 116 using xhci-hcd
[ 260.689908@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 260.689914@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 260.689916@3] usb 1-2: Product: eLight
[ 260.689918@3] usb 1-2: Manufacturer: Sundtek
[ 260.689919@3] usb 1-2: SerialNumber: U190406135620
[ 260.717278@3] usb 1-2: Unsupported device
[ 261.561010@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 261.561073@3] usb 1-2: USB disconnect, device number 116
[ 261.792425@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 261.800762@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 261.852375@3] usb 1-2: new high-speed USB device number 117 using xhci-hcd
[ 262.120301@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 262.180280@3] usb 1-2: device descriptor read/64, error -71
[ 262.429502@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 262.429505@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 262.429508@3] usb 1-2: Product: eLight
[ 262.429510@3] usb 1-2: Manufacturer: Sundtek
[ 262.429511@3] usb 1-2: SerialNumber: U190406135620
[ 262.445217@3] usb 1-2: Unsupported device
[ 263.445386@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 263.445452@3] usb 1-2: USB disconnect, device number 117
[ 263.675890@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 263.678627@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 263.735833@3] usb 1-2: new high-speed USB device number 118 using xhci-hcd
[ 264.003761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 264.063742@3] usb 1-2: device descriptor read/64, error -71
[ 264.312944@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 264.312947@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 264.312949@3] usb 1-2: Product: eLight
[ 264.312951@3] usb 1-2: Manufacturer: Sundtek
[ 264.312952@3] usb 1-2: SerialNumber: U190406135620
[ 264.333213@3] usb 1-2: Unsupported device
[ 264.497761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 264.498232@3] usb 1-2: USB disconnect, device number 118
[ 264.743582@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 264.758389@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 264.807519@3] usb 1-2: new high-speed USB device number 119 using xhci-hcd
[ 265.075475@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 265.135433@3] usb 1-2: device descriptor read/64, error -71
[ 265.384672@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 265.384675@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 265.384677@3] usb 1-2: Product: eLight
[ 265.384679@3] usb 1-2: Manufacturer: Sundtek
[ 265.384681@3] usb 1-2: SerialNumber: U190406135620
[ 265.389206@3] usb 1-2: Unsupported device
[ 266.512012@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 266.512077@3] usb 1-2: USB disconnect, device number 119
[ 266.751053@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 266.810971@3] usb 1-2: new high-speed USB device number 120 using xhci-hcd
[ 266.956214@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 266.956219@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 266.956222@3] usb 1-2: Product: eLight
[ 266.956224@3] usb 1-2: Manufacturer: Sundtek
[ 266.956225@3] usb 1-2: SerialNumber: U190406135620
[ 266.957201@3] usb 1-2: Unsupported device
[ 267.021261@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 267.021333@3] usb 1-2: USB disconnect, device number 120
[ 267.266861@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 267.326822@3] usb 1-2: new high-speed USB device number 121 using xhci-hcd
[ 267.414262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 267.446845@3] usb 1-2: Device not responding to setup address.
[ 267.654746@3] usb 1-2: Device not responding to setup address.
[ 267.862648@3] usb 1-2: device not accepting address 121, error -71
[ 268.130588@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 268.190551@3] usb 1-2: new high-speed USB device number 122 using xhci-hcd
[ 268.331822@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 268.331825@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 268.331827@3] usb 1-2: Product: eLight
[ 268.331829@3] usb 1-2: Manufacturer: Sundtek
[ 268.331831@3] usb 1-2: SerialNumber: U190406135620
[ 268.333208@3] usb 1-2: Unsupported device
[ 269.297132@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 269.297191@3] usb 1-2: USB disconnect, device number 122
[ 269.530255@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 269.590201@3] usb 1-2: new high-speed USB device number 123 using xhci-hcd
[ 269.669131@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 269.710195@3] usb 1-2: Device not responding to setup address.
[ 269.918087@3] usb 1-2: Device not responding to setup address.
[ 270.126016@3] usb 1-2: device not accepting address 123, error -71
[ 270.393947@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 270.453919@3] usb 1-2: new high-speed USB device number 124 using xhci-hcd
[ 270.595174@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 270.595177@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 270.595179@3] usb 1-2: Product: eLight
[ 270.595181@3] usb 1-2: Manufacturer: Sundtek
[ 270.595182@3] usb 1-2: SerialNumber: U190406135620
[ 270.605209@3] usb 1-2: Unsupported device
[ 270.657757@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 270.657839@3] usb 1-2: USB disconnect, device number 124
[ 270.873917@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 270.903886@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 270.937801@3] usb 1-2: new high-speed USB device number 125 using xhci-hcd
[ 271.205776@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 271.214501@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 271.265723@3] usb 1-2: device descriptor read/64, error -71
[ 271.641601@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 271.701588@3] usb 1-2: device descriptor read/64, error -71
[ 272.137468@3] usb 1-2: new high-speed USB device number 126 using xhci-hcd
[ 272.231377@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 272.257477@3] usb 1-2: Device not responding to setup address.
[ 272.465399@3] usb 1-2: Device not responding to setup address.
[ 272.673311@3] usb 1-2: device not accepting address 126, error -71
[ 272.673339@3] usb usb1-port2: attempt power cycle
[ 273.257161@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 273.317130@3] usb 1-2: new high-speed USB device number 127 using xhci-hcd
[ 273.338562@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 273.338564@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 273.338567@3] usb 1-2: Product: eLight
[ 273.338569@3] usb 1-2: Manufacturer: Sundtek
[ 273.338570@3] usb 1-2: SerialNumber: U190406135620
[ 273.357252@3] usb 1-2: Unsupported device
[ 274.531386@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 274.531451@3] usb 1-2: USB disconnect, device number 127
[ 274.744800@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 274.753262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 274.804746@3] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[ 275.072678@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 275.085872@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 275.132662@3] usb 1-2: device descriptor read/64, error -71
[ 275.508542@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 275.568531@3] usb 1-2: device descriptor read/64, error -71
[ 275.796451@3] usb 1-2: new high-speed USB device number 5 using xhci-hcd
[ 275.937784@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 275.937790@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 275.937792@3] usb 1-2: Product: eLight
[ 275.937793@3] usb 1-2: Manufacturer: Sundtek
[ 275.937795@3] usb 1-2: SerialNumber: U190406135620
[ 275.949239@3] usb 1-2: Unsupported device
[ 276.225388@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 276.225919@3] usb 1-2: USB disconnect, device number 5
[ 276.444327@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 276.504282@3] usb 1-2: new high-speed USB device number 6 using xhci-hcd
[ 276.636132@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 276.644428@3] usb 1-2: device descriptor read/all, error -71
[ 276.644466@3] xhci-hcd xhci-hcd.0.auto: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[ 276.644469@3] xhci-hcd xhci-hcd.0.auto: ep deq seg = ffffffc08e225900, deq ptr = ffffff800883b0c0
[ 276.912162@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 276.972132@3] usb 1-2: new high-speed USB device number 7 using xhci-hcd
[ 277.113390@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 277.113396@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 277.113398@3] usb 1-2: Product: eLight
[ 277.113400@3] usb 1-2: Manufacturer: Sundtek
[ 277.113401@3] usb 1-2: SerialNumber: U190406135620
[ 277.133270@3] usb 1-2: Unsupported device
[ 277.456890@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 277.456979@3] usb 1-2: USB disconnect, device number 7
[ 277.687992@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 277.691638@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 277.747942@3] usb 1-2: new high-speed USB device number 8 using xhci-hcd
[ 278.015879@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 278.075861@3] usb 1-2: device descriptor read/64, error -71
[ 278.325066@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 278.325069@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 278.325071@3] usb 1-2: Product: eLight
[ 278.325073@3] usb 1-2: Manufacturer: Sundtek
[ 278.325075@3] usb 1-2: SerialNumber: U190406135620
[ 278.349205@3] usb 1-2: Unsupported device
[ 278.876512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 278.876604@3] usb 1-2: USB disconnect, device number 8
[ 279.099620@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 279.115262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 279.159564@3] usb 1-2: new high-speed USB device number 9 using xhci-hcd
[ 279.427499@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 279.487483@3] usb 1-2: device descriptor read/64, error -71
[ 279.736610@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 279.736613@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 279.736615@3] usb 1-2: Product: eLight
[ 279.736617@3] usb 1-2: Manufacturer: Sundtek
[ 279.736619@3] usb 1-2: SerialNumber: U190406135620
[ 279.757215@3] usb 1-2: Unsupported device
[ 279.885140@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 279.885643@3] usb 1-2: USB disconnect, device number 9
[ 280.123349@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 280.134512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 280.183290@3] usb 1-2: new high-speed USB device number 10 using xhci-hcd
[ 280.451251@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 280.511213@3] usb 1-2: device descriptor read/64, error -71
[ 280.564622@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 280.887122@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 280.947085@3] usb 1-2: device descriptor read/64, error -71
[ 281.175006@3] usb 1-2: new high-speed USB device number 11 using xhci-hcd
[ 281.316317@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 281.316323@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 281.316325@3] usb 1-2: Product: eLight
[ 281.316327@3] usb 1-2: Manufacturer: Sundtek
[ 281.316329@3] usb 1-2: SerialNumber: U190406135620
[ 281.325208@3] usb 1-2: Unsupported device
[ 281.373258@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 281.373343@3] usb 1-2: USB disconnect, device number 11
[ 281.598959@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 281.658895@3] usb 1-2: new high-speed USB device number 12 using xhci-hcd
[ 281.808100@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 281.808105@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 281.808107@3] usb 1-2: Product: eLight
[ 281.808109@3] usb 1-2: Manufacturer: Sundtek
[ 281.808110@3] usb 1-2: SerialNumber: U190406135620
[ 281.837273@3] usb 1-2: Unsupported device
[ 281.977763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 281.977826@3] usb 1-2: USB disconnect, device number 12
[ 282.199381@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 282.258755@3] usb 1-2: new high-speed USB device number 13 using xhci-hcd
[ 282.357888@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 282.379089@3] usb 1-2: Device not responding to setup address.
[ 282.586673@3] usb 1-2: Device not responding to setup address.
[ 282.794582@3] usb 1-2: device not accepting address 13, error -71
[ 283.062524@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 283.102747@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 283.122494@3] usb 1-2: new high-speed USB device number 14 using xhci-hcd
[ 283.390435@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 283.450427@3] usb 1-2: device descriptor read/64, error -71
[ 283.537745@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 283.826348@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 283.886311@3] usb 1-2: device descriptor read/64, error -71
[ 283.994282@3] usb usb1-port2: attempt power cycle
[ 284.202264@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 284.578120@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 284.638092@3] usb 1-2: new high-speed USB device number 15 using xhci-hcd
[ 284.659525@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 284.659528@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 284.659530@3] usb 1-2: Product: eLight
[ 284.659532@3] usb 1-2: Manufacturer: Sundtek
[ 284.659534@3] usb 1-2: SerialNumber: U190406135620
[ 284.685213@3] usb 1-2: Unsupported device
[ 284.754760@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 284.754814@3] usb 1-2: USB disconnect, device number 15
[ 284.982052@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 285.042014@3] usb 1-2: new high-speed USB device number 16 using xhci-hcd
[ 285.391177@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 285.391182@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 285.391184@3] usb 1-2: Product: eLight
[ 285.391186@3] usb 1-2: Manufacturer: Sundtek
[ 285.391188@3] usb 1-2: SerialNumber: U190406135620
[ 285.421208@3] usb 1-2: Unsupported device
[ 285.929639@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 285.929711@3] usb 1-2: USB disconnect, device number 16
[ 286.133751@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 286.193698@3] usb 1-2: new high-speed USB device number 17 using xhci-hcd
[ 286.273507@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 286.313711@3] usb 1-2: Device not responding to setup address.
[ 286.521616@3] usb 1-2: Device not responding to setup address.
[ 286.729547@3] usb 1-2: device not accepting address 17, error -71
[ 286.997514@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 287.045133@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 287.057479@3] usb 1-2: new high-speed USB device number 18 using xhci-hcd
[ 287.325405@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 287.385402@3] usb 1-2: device descriptor read/64, error -71
[ 287.394006@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 287.765296@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 287.825281@3] usb 1-2: device descriptor read/64, error -71
[ 287.933255@3] usb usb1-port2: attempt power cycle
[ 288.141245@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 288.517088@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 288.577062@3] usb 1-2: new high-speed USB device number 19 using xhci-hcd
[ 288.598502@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 288.598505@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 288.598507@3] usb 1-2: Product: eLight
[ 288.598509@3] usb 1-2: Manufacturer: Sundtek
[ 288.598511@3] usb 1-2: SerialNumber: U190406135620
[ 288.621216@3] usb 1-2: Unsupported device
[ 289.081887@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 289.081967@3] usb 1-2: USB disconnect, device number 19
[ 289.308955@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 289.339388@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 289.368885@3] usb 1-2: new high-speed USB device number 20 using xhci-hcd
[ 289.636817@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 289.696799@3] usb 1-2: device descriptor read/64, error -71
[ 289.945981@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 289.945984@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 289.945986@3] usb 1-2: Product: eLight
[ 289.945988@3] usb 1-2: Manufacturer: Sundtek
[ 289.945990@3] usb 1-2: SerialNumber: U190406135620
[ 289.965217@3] usb 1-2: Unsupported device
[ 290.983261@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 290.983333@3] usb 1-2: USB disconnect, device number 20
[ 291.192458@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 291.249515@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 291.252415@3] usb 1-2: new high-speed USB device number 21 using xhci-hcd
[ 291.520328@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 291.580314@3] usb 1-2: device descriptor read/64, error -71
[ 291.829507@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 291.829510@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 291.829512@3] usb 1-2: Product: eLight
[ 291.829514@3] usb 1-2: Manufacturer: Sundtek
[ 291.829516@3] usb 1-2: SerialNumber: U190406135620
[ 291.853216@3] usb 1-2: Unsupported device
[ 292.757013@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 292.757090@3] usb 1-2: USB disconnect, device number 21
[ 292.987975@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 293.010512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 293.047947@3] usb 1-2: new high-speed USB device number 22 using xhci-hcd
[ 293.315873@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 293.375857@3] usb 1-2: device descriptor read/64, error -71
[ 293.625076@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 293.625079@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 293.625081@3] usb 1-2: Product: eLight
[ 293.625083@3] usb 1-2: Manufacturer: Sundtek
[ 293.625085@3] usb 1-2: SerialNumber: U190406135620
[ 293.645223@3] usb 1-2: Unsupported device
[ 293.721385@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 293.721454@3] usb 1-2: USB disconnect, device number 22
[ 293.943750@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 293.957885@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 294.003696@3] usb 1-2: new high-speed USB device number 23 using xhci-hcd
[ 294.271670@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 294.304876@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 294.331620@3] usb 1-2: device descriptor read/64, error -71
[ 294.707514@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 294.717246@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 294.767499@3] usb 1-2: device descriptor read/64, error -71
[ 295.143402@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 295.149870@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 295.203372@3] usb 1-2: new high-speed USB device number 24 using xhci-hcd
[ 295.471326@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 295.480745@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 295.531309@3] usb 1-2: device descriptor read/64, error -71
[ 295.907207@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 295.967194@3] usb 1-2: device descriptor read/64, error -71
[ 296.075168@3] usb usb1-port2: attempt power cycle
[ 296.283159@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 296.659014@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 296.718988@3] usb 1-2: new high-speed USB device number 25 using xhci-hcd
[ 296.723245@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--