Sundtek Support Forum
Deutsch => Sundtek MediaTV Pro => Thema gestartet von: aassaa am Februar 22, 2011, 09:04:06 Nachmittag
-
Hallo,
ich hätte gern gewusst was ich verdammt nochmal tun muss um unter Ubuntu lucid DVB-T scanen źu dürfen?
Treiber ist aktuell installiert.
scan:
scan /usr/share/dvb/dvb-t/de-Berlin
scanning /usr/share/dvb/dvb-t/de-Berlin
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 117500000 1 3 9 1 1 2 0
initial transponder 191500000 1 2 9 1 1 2 0
initial transponder 506000000 0 2 9 1 1 2 0
initial transponder 522000000 0 2 9 1 1 2 0
initial transponder 570000000 0 2 9 1 1 3 0
initial transponder 658000000 0 2 9 1 1 2 0
initial transponder 754000000 0 2 9 1 1 2 0
initial transponder 778000000 0 2 9 1 1 2 0
WARNING: frontend type (QAM) is not compatible with requested tuning type (OFDM)
WARNING: frontend type (QAM) is not compatible with requested tuning type (OFDM)
WARNING: frontend type (QAM) is not compatible with requested tuning type (OFDM)
WARNING: frontend type (QAM) is not compatible with requested tuning type (OFDM)
WARNING: frontend type (QAM) is not compatible with requested tuning type (OFDM)
WARNING: frontend type (QAM) is not compatible with requested tuning type (OFDM)
WARNING: frontend type (QAM) is not compatible with requested tuning type (OFDM)
WARNING: frontend type (QAM) is not compatible with requested tuning type (OFDM)
ERROR: initial tuning failed
dumping lists (0 services)
Done.
Ein: /opt/bin/mediaclient --shutdown && /opt/bin/mediaclient --start -m DVBT
hilft hier nicht weiter.
Danke für Infos.
-
OFDM ist DVB-C
shutdown und start ist hierbei irrelevant.
Dynamisch umschalten:
/opt/bin/mediaclient -D DVBT (bzw. DVBC)
oder per Konfigurationsdatei sofern DVB-T permanent konfiguriert werden soll
/opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [Sundtek MediaTV Digital Home] DVB-C, DVB-T, REMOTE-CONTROL
[SERIAL]:
ID: 0110202073110
/etc/sundtek.conf
[0110202073110] (Seriennummer wie oben angegeben in Klammer)
initial_dvb_mode=DVBT
oder
initial_dvb_mode=DVBC
Siehe Allgemeine Installation unter Linux (Kaffeine oder Mplayer / DVB-T):
http://support.sundtek.com/index.php/topic,2.0.html
-
Soweit so gut, es läuft erstmal mit der Umschaltung, Danke!
Was trage ich als SERIAL ein?
mediaclient -e
**** List of Media Hardware Devices ****
device 0: [ Sundtek MediaTV Pro] DVB-C, DVB-T, ANALOG-TV, FM-RADIO, REMOTE-CONTROL, OSS-AUDIO, RDS
[DVB-C]:
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[DVB-T]:
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[ANALOG-TV]:
VIDEO0: /dev/video1
VBI0: /dev/vbi0
[FM-RADIO]:
RADIO0: /dev/radio0
RDS: /dev/rds0
[REMOTECONTROL]:
INPUT0: /dev/mediainput0
[OSS]:
OSS0: /dev/dsp0
-
Was zeigt den /opt/bin/mediaclient --build an?
Die Seriennummer wird erst ab dem derzeitigen Beta Treiber angezeigt.