Sundtek Support Forum
English => {Single, Dual, Quad} Sundtek SkyTV Ultimate => Thema gestartet von: s@parator am September 20, 2013, 01:03:09 Nachmittag
-
I have a problem with the drivers of installment correctly soundtek DVB-C/DVB-Tdriver installation was a success properly but USB is not detected in receivers
-
Well the box will need support for external Tuners (eg. the vtuner interface).
What does following show up:
ls /dev/vtun* /dev/misc/vtun*
if it shows up No such file or directory or nothing no direct Enigma Support will be available.
-
Copy and paste it if possible you added too many spaces
ls /dev/vtun* /dev/misc/vtun*
-
What you still can do is to stream TV from that box to the PC using our network support
-
instalng ok.
(http://i.imgbox.com/adi4j1AE.jpg)
-
you entered:
ls / dev / vtun * / dev / misc / vtun *
but it should be:
ls /dev/vtun* /dev/misc/vtun*
-
nbox login: root
BusyBox v1.19.3 (2012-01-04 10:10:53 PST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
nbox:~# ls /dev/vtun* /dev/misc/vtun*
ls: /dev/vtun*: No such file or directory
ls: /dev/misc/vtun*: No such file or directory
nbox:~#
nbox:~#
nbox:~# uname -r
2.6.32.59_stm24_0211
nbox:~# cat /proc/version
Linux version 2.6.32.59_stm24_0211 (root@stlinux-virtual-machine) (gcc version 4.5.3 20110525 (STMicroelectronics/Linux Base 4.5.3-92) (GCC) ) #21 PREEMPT Sat Apr 13 12:47:21 CEST 2013
nbox:~# rpm -q kernel
-sh: rpm: not found
nbox:~# dmesg | grep Linux
dmesg: klogctl: Function not implemented
nbox:~# ls /boot
audio.elf logo.mvi video.elf
nbox:~#
-
nbox login: root
BusyBox v1.19.3 (2012-01-04 10:10:53 PST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
nbox:~# ls /dev/vtun* /dev/misc/vtun*
ls: /dev/vtun*: No such file or directory
ls: /dev/misc/vtun*: No such file or directory
nbox:~#
that is what I thought, you will have to find another way to be able to use the tuner on the settopbox I guess. There is no external tuner support for that box at the moment.
The driver works on it so you could use it for streaming to a windows or linux PC.
-
nbox login: root
BusyBox v1.19.3 (2012-01-04 10:10:53 PST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
nbox:~# ls /dev/vtun* /dev/misc/vtun*
ls: /dev/vtun*: No such file or directory
ls: /dev/misc/vtun*: No such file or directory
nbox:~#
that is what I thought, you will have to find another way to be able to use the tuner on the settopbox I guess. There is no external tuner support for that box at the moment.
The driver works on it so you could use it for streaming to a windows or linux PC.
controller has has installed correctly but it does not initiate a USB port is not seen in the NBOX.
pity it can not be repaired you had the number of customers in., UK and Poland
-
what is the output of following commands:
/opt/bin/mediaclient -e
/opt/bin/mediaclient --lsusb
-
nbox:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [Sundtek MediaTV Digital Home (USB 2.0)] DVB-C, DVB-T, REMOTE-CONTROL
[BUS]:
ID: 1-1
[SERIAL]:
ID: U1112042
[DVB-C]:
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0
[DVB-T]:
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0
[REMOTECONTROL]:
INPUT0: /dev/mediainput0
nbox:~# /opt/bin/mediaclient --lsusb
nbox:~# /opt/bin/mediaclient -lsusb
Using device: /dev/mediainput0
supported remote control protocols:
id protocol name
0 .. NEC IR Protocol (active)
1 .. RC5 IR Protocol
2 .. RC6 Mode0 IR Protocol
3 .. RC6 Mode6A IR Protocol
nbox:~#
-
(http://i41.tinypic.com/21eujig.jpg)
another tuner dvb-t work properly is visible in the
-
ah, then it might work. However contact us via Skype (Account "sundtek")
-
nbox login: root
BusyBox v1.19.3 (2012-01-04 10:10:53 PST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
nbox:~# ps
PID USER VSZ STAT COMMAND
1 root 1836 S {init} ini
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [events/0]
5 root 0 SW [khelper]
11 root 0 SW [async/mgr]
135 root 0 SW [sync_supers]
137 root 0 SW [bdi-default]
139 root 0 SW [kblockd/0]
145 root 0 SW [ata/0]
146 root 0 SW [ata_aux]
154 root 0 SW [khubd]
157 root 0 SW [kseriod]
173 root 0 SW [rpciod/0]
186 root 0 SW [kswapd0]
187 root 0 SW [aio/0]
188 root 0 SW [nfsiod]
189 root 0 SW< [kslowd000]
190 root 0 SW< [kslowd001]
222 root 0 SW [scsi_eh_0]
228 root 0 SW [mtdblockd]
327 root 0 SWN [jffs2_gcd_mtd0]
330 root 1836 S {init} ini
331 root 2592 S {rcS} /bin/sh /etc/init.d/rcS
365 root 2460 S /usr/sbin/automount --timeout=5 /autofs file /etc/au
405 root 2596 S /usr/sbin/telnetd -l /bin/login
410 root 0 SW [hdmid/0]
433 root 0 SW [EMBXSHM-NewPort]
434 root 0 SW [EMBXSHM-PortClo]
482 root 0 DW< [pti_task]
507 root 0 DW [Havana player E]
522 root 0 DW [SMART/0]
523 root 0 DW [SMART/1]
529 root 1960 S /usr/bin/lircd
530 root 1736 S /bin/evremote2
534 bin 1824 S /sbin/portmap
540 root 2516 S /usr/bin/vsftpd
542 root 2592 S /usr/sbin/inetd
554 root 0 SW [ExecutionLoopNo]
559 root 69496 D /usr/local/bin/enigma2_lp3
595 root 46556 S /opt/bin/mediasrv -d --pluginpath=/opt/bin
596 root 5596 S /opt/bin/mediasrv -d --pluginpath=/opt/bin
614 root 0 SW [jbd2/sda1-8]
615 root 0 SW [ext4-dio-unwrit]
617 root 0 SW [flush-8:0]
651 root 0 SW [kdvb-ad-0-fe-0]
657 root 0 SW [HostRec40800002]
658 root 0 SW [Player Aud Mixe]
659 root 0 DW [Player Aud 0]
660 root 0 DW [Player Aud 1]
661 root 0 DW [Player Aud 2]
662 root 0 DW [Player Aud 3]
663 root 0 SW [HostRec40800003]
664 root 0 SW [Manifestor Buff]
665 root 0 DW [Manifestor Disp]
666 root 0 DW [Interocitor 0]
667 root 0 DW [Interocitor 1]
668 root 0 DW [Interocitor 2]
669 root 0 DW [Interocitor 3]
708 root 3032 S -sh
718 root 3032 R ps
nbox:~#
process work
-
There's an update so far
(http://sundtek.de/images/arte_HD.png)
(http://sundtek.de/images/arte_HD2.png)
cat /proc/bus/nim_sockets
NIM Socket 0:
Type: DVB-S2
Name: STB0899 Multistandard ID1
Frontend_Device: 0
NIM Socket 1:
Type: DVB-S2
Name: STB0899 Multistandard ID2
Frontend_Device: 1
NIM Socket 2:
Type: DVB-C
Name: Sundtek DVB-C (0/0)
Frontend_Device: 2
nbox:~# cat /proc/cpuinfo
machine : STb7100 Reference board
processor : 0
cpu family : sh4
cpu variant : sh4-202
cpu type : STx7100
cut : 3.x
cpu flags : fpu
cache type : split (harvard)
icache size : 16KiB (2-way)
dcache size : 32KiB (2-way)
address sizes : 29 bits physical
bogomips : 264.19
Mem: 95144K used, 3012K free, 0K shrd, 884K buff, 28360K cached
CPU: 6.5% usr 43.2% sys 0.0% nic 48.8% idle 0.0% io 1.1% irq 0.1% sirq
Load average: 15.16 14.97 12.72 2/85 1816
PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND
913 831 root S 82064 83.4 0 22.0 ./mediasrv -v --no-nodes
we're implementing our own vtuner module here.
Driver CPU Usage is ~25% for HDTV
Driver CPU Usage is 1-5% for SDTV
-
How new update driver ??