Sundtek Support Forum
English => Software Sundtek Ltd. => Thema gestartet von: pr2 am August 04, 2012, 08:49:24 Nachmittag
-
Hi,
What is the right way to install Sundtek Pro DVB-C/T tuner driver on Raspberry Pi (Raspbian)?
How to select between DVB-T and DVB-C mode?
Pr2
-
Quick Installation:
cd /tmp
wget http://sundtek.de/media/sundtek_netinst.sh
chmod 777 sundtek_netinst.sh
./sundtek_netinst.sh
Choosing between DVB-C and DVB-T:
/opt/bin/mediaclient -DDVBC
or
/opt/bin/mediaclient -DDVBT
Please note only the netinstaller will work on the RPI (the netinstaller only requires around 5mb temporary space, while the multi-arch installer requires around 50mb).
Additional the RPI needs an active USB hub to support USB TV devices (since the board only provides 125mA (instead of 500mA USB 2.0 Spec)
-
Hi,
As usual thanks for your quick answer, it seems to work fine.
Just need to run:
sudo ./sundtek_netinst.sh
Regards,
Pr2