Willkommen Gast. Bitte einloggen oder registrieren.

Einloggen mit Benutzername, Passwort und Sitzungslänge

 
Erweiterte Suche

17297 Beiträge in 2072 Themen- von 2950 Mitglieder - Neuestes Mitglied: Hannes

September 25, 2017, 10:38:57 pm
Sundtek Support ForumEnglishSundtek MediaTV Pro (Europe)Seagate Dockstar [ 1.2 Ghz ARM System ] Streamingserver
Seiten: [1]
Drucken
Autor Thema: Seagate Dockstar [ 1.2 Ghz ARM System ] Streamingserver  (Gelesen 7716 mal)
Sundtek
Administrator
Hero Member
*****
Beiträge: 7457


Profil anzeigen
« am: September 26, 2010, 10:48:05 pm »

Seagate Dockstar

CPU ARM 1.2 Ghz
Memory 128 MB Ram



Installation:

The driver will be installed in memory for now, so far we also tested 2 DVB-C sticks at the same time.

1. connect to your dockstar using ssh (the default root password is stxadmin):

Zitat
# cd /tmp
# wget http://www.sundtek.de/media/sundtek_installer_development.sh
# chmod 777 sundtek_installer_development.sh
# ./sundtek_installer_development.sh
Busybox installation

Welcome to the Sundtek linux driver setup

Legal notice:
This software comes without any warranty, use it at your own risk

Do you want to continue [Y/N]:
Nutzungsbedingungen:
Sundtek übernimmt keinerlei Haftung für Schäden welche eventuell durch
das System oder die angebotenen Dateien entstehen können.

Wollen Sie fortfahren [J/N]:
y
stopping old driver instance...
unpacking...
checking system... Dockstar like system detected
installing...
Starting driver...
switching off loglevel
Enabling network support
done.

after this intallation you can simply follow the normal network clientsetup on remote pcs
Using DVB in your homenetwork
« Letzte Änderung: Oktober 16, 2010, 09:07:38 pm von Sundtek » Gespeichert

Sundtek Ltd. Support Engineer
roel
Newbie
*
Beiträge: 4


Profil anzeigen
« Antworten #1 am: September 30, 2010, 07:17:17 pm »

Hi,

This is just what I like very much.
I already own two dockstar's. I'm testing with an other usb tuner which has a cam built-in.
But the (cam) driver support of this other tuner is not yet ready.

--
Edit by Sundtek:
removed the part which contained unwanted information
--

In other forum messages i've already read about an upcomming Sundtek CAM solution.

I hardly can't wait to see someting like that working on a dockstar !

Please let me know if there is any progress with a cam solution

Kind regards,

Roel

« Letzte Änderung: Oktober 01, 2010, 09:10:16 pm von Sundtek » Gespeichert
Sundtek
Administrator
Hero Member
*****
Beiträge: 7457


Profil anzeigen
« Antworten #2 am: Oktober 01, 2010, 09:10:46 pm »

We can go for the USB CI module after 13th. Oct - the official release date of DVB-S/S2 USB
Gespeichert

Sundtek Ltd. Support Engineer
roel
Newbie
*
Beiträge: 4


Profil anzeigen
« Antworten #3 am: Oktober 14, 2010, 06:40:08 pm »

Hi,


Can we start another topic on the USB-CI module ?

For this topic , i've already the following questions:

- When will it be launched ?
- what cam modules are supported ?

Roel
Gespeichert
Sundtek
Administrator
Hero Member
*****
Beiträge: 7457


Profil anzeigen
« Antworten #4 am: Oktober 15, 2010, 01:15:34 am »

This will take some more time. We're waiting for DVB-S/S2 feedback now and improving the Settopbox support for this until upcoming week. After that USB CI will be a topic again yes.
Gespeichert

Sundtek Ltd. Support Engineer
trosenda
Newbie
*
Beiträge: 1


Profil anzeigen
« Antworten #5 am: Oktober 28, 2010, 03:15:45 pm »

hi,

I would like to jump here on as well.
I want to migrate from mythtv with dvb-t to dvb-c (dockstar underneath).
unfortunately, unitymedia forces me to use a CI.
i would volunteer to tun a beta Zwinkernd
having an alphacrypt card already working.


tia
trosenda
Gespeichert
Sundtek
Administrator
Hero Member
*****
Beiträge: 7457


Profil anzeigen
« Antworten #6 am: Oktober 28, 2010, 03:18:11 pm »

Due too many problems in October -- but surprisingly we were able to solve most of them already -- we can dig into USB CI again right at the beginning of November.
We already worked on this a 3/4 year ago but never completed it.

We even have a bunch of Dockstars in our office waiting to get prepared for Streaming/PayTV (using USB CI)/and our TV devices
« Letzte Änderung: Oktober 28, 2010, 03:19:52 pm von Sundtek » Gespeichert

Sundtek Ltd. Support Engineer
yahgoo
Newbie
*
Beiträge: 1


Profil anzeigen
« Antworten #7 am: Dezember 28, 2010, 10:43:53 am »

Hi Sundtek

I want to buy Sundtek Media TV Pro for use in Singapore. I think we have DVB-T broadcast here. Will it work?

Where can I see it in demo with Seagate Dockstar? Youtube?
Gespeichert
Seiten: [1]
Drucken
Gehe zu: