Willkommen Gast. Bitte einloggen oder registrieren.

Einloggen mit Benutzername, Passwort und Sitzungslänge

 
Erweiterte Suche

17794 Beiträge in 2132 Themen- von 3031 Mitglieder - Neuestes Mitglied: Gutz-Pilz

Mai 26, 2018, 02:18:42 am
Sundtek Support ForumEnglishSundtek SkyTV UltimateSundtek SkyTV IV
Seiten: [1]
Drucken
Autor Thema: Sundtek SkyTV IV  (Gelesen 2961 mal)
Sundtek
Administrator
Hero Member
*****
Beiträge: 7665


Profil anzeigen
« am: September 24, 2014, 06:32:55 am »

Berlin, September / October 2014

Sundtek SkyTV IV is our new DVB-S/S2 tuner stick. Within the last year we had to restructure our company (we split off a chip design house and develop everything in Berlin/Germany nowadays).
While the old tuners were using the main USB Chip of the previous USB company the new DVB-S/S2 Tuners are using brand new components from the market.

Neue Features:
* new USB chipsets are specified to support up to at least 90mbit DVB-S/S2 transponders
* new DVB-S/S2 Chipsets

* Bulk / Isochronous Support
* 15 PID hardware pid fitlers
* transponder support up to 130mbit (in order to meet the 90mbit restriction PID filters can be used, practically we have transponders up to 73 Mbit in Europe).
* 0V/13V/18V LNB Power Supply (optional AC adapter, the requirement of the AC adapter depends on the used LNB).
* Demodulation types: QPSK, 8PSK, 16APSK, 32APSK
* Symbolrate up to 53Msps
* Short circuit detection (which can also be checked via Software!)
- Red LED / Hardware Short Circuit protection
- Green blinking LED / additional software short circuit protection
- Permanently green / everything's okay
- LED off / Standby
* It is possible to use LNBs without AC Adapter, however this requires a low power LNB:

* 300mA max (cut off power)

* Software detection if AC Adapter is delivering power
* S-Video / Composite / Audio L,R (Line in)
* Support for remote control (interrupt based, almost no system resources are used for that)
* Supports various different architectures (ARM, Mips, PPC, SH4 / Linux, MacOSX, FreeBSD).
* partial and full standby support (if S-Video/Composite is used DVB-S/S2 will be put into standby mode)
* full standby support (all components will be put into standby mode)
- 50mA (Chip Standby + lnb voltage cut off)

* the devices are engineered in Berlin, we are able to fully support our device.


Shipping:
Official shipping will start at 3rd October 2014

Tuner upgrade
If you own a Sundtek SkyTV I or Sundtek SkyTV II device we offer some great discount if you want to upgrade your tuner.

In order to request a device upgrade contact us via email: kontakt at sundtek de.
« Letzte Änderung: September 24, 2014, 04:18:42 pm von Sundtek » Gespeichert

Sundtek Ltd. Support Engineer
Seiten: [1]
Drucken
Gehe zu: