Letzter Beitrag: rassi

Willkommen Gast. Bitte einloggen oder registrieren. Einloggen mit Benutzername, Passwort und Sitzungslänge

9224 Beiträge in 1184 Themen- von 1722 Mitglieder - Neuestes Mitglied: viebrix

Mai 19, 2013, 03:24:21 am

Beiträge anzeigen
Seiten: [1] 2

1	English / VU+ - VU Duo Settopbox / Re:Vu + DUO support	am: November 29, 2012, 12:41:43 pm
Ok. Newest now installed. We'll see whats going to happen with them. Build date: 2012-11-28 16:25:45

2	English / VU+ - VU Duo Settopbox / Re:Vu + DUO support	am: November 29, 2012, 11:45:45 am
Ok. From OpenPli forum Zitat I am running open pli 3.0 (2012-11-12), sundtek drivers 121027.112338 (I experienced some problems with later drivers, didn't test the newest ones), oscam-experimental. I have two usb dvb-c tuners connected to two rear usb ports without any hub and everything works ok. Finally!!! How i can install older drivers? If i'll try that one first or try latest ones from you.. If there has anything changed to VU+ from 13.11 to 27.11? edit: Found it http://www.sundtek.de/media/sundtek_installer_12102 7.112338.sh

3	English / VU+ - VU Duo Settopbox / Re:Vu + DUO support	am: November 29, 2012, 11:09:44 am
Thanks. Looks like BH did have modules from 20120820 (not 100% sure about this) and VIX has drivers 20121025. I´ll give a try. But how about that --dtvtransfermode=bulk? If driver change do not give help, this can give?

4	English / VU+ - VU Duo Settopbox / Re:Vu + DUO support	am: November 29, 2012, 07:07:08 am
Zitat von: Sundtek am Mai 08, 2012, 08:25:26 pm Maybe setting the devicemode to bulk by running following command: Zitat /opt/bin/mediaclient --dtvtransfermode=bulk -d /dev/dvb/adapter1/frontend0 What this command will really do? If I'll give this command will it last after reboot also? I changed Vu+ DUO image from BlackHole 1.7.8 to OpenVIX (Newest build) and I see this same issues what flc has seen. There wasn´t this kind of issue with BH it do work like a charm. So what to do, is there working workaround? Problem starts maybe after one day. Reboots help to get clear picture again for a while. I do have 2x Sundtek Pro. First one is used for C-channels and second for T-channels, both sticks are connected to active USB hub. I have used 13.11 drivers with BH and OpenVIX. root@vuduo:~# /opt/bin/mediaclient --build Build date: 2012-11-13 17:48:18 I have used this kind of sundtek.conf Code: root@vuduo:/etc# cat sundtek.conf [tek00147] initial_dvb_mode=DVBC dreambox_support_fe1=on [tek001477] initial_dvb_mode=DVBT dreambox_support_fe1=on

5	English / VU+ - VU Duo Settopbox / Re:Media TVPro problems	am: März 24, 2012, 02:13:24 pm
Ok, stats are pretty hebrew to me This was from VU+ DUO another capture with just rebooted & viewing T-channel Code: Mem: 131832K used, 6508K free, 0K shrd, 0K buff, 44020K cached CPU: 2.4% usr 4.0% sys 0.0% nic 92.5% idle 0.0% io 0.0% irq 0.8% sirq Load average: 0.99 1.40 1.41 3/106 5889 PID PPID USER STAT VSZ %MEM CPU %CPU COMMAND 864 1 root S 115m 84.9 1 1.8 /opt/bin/mediasrv -d --no-nodes 860 857 root S 141m104.7 1 1.5 /usr/bin/enigma2 5864 1 root S 115m 84.9 1 1.3 /opt/bin/mediasrv -d --no-nodes 67 2 root SW 0 0.0 0 0.7 [sched_high] 5852 5849 root R 2888 2.0 0 0.2 top 863 1 root S 115m 84.9 0 0.1 /opt/bin/mediasrv -d --no-nodes 3 2 root SW 0 0.0 0 0.1 [ksoftirqd/0] 868 857 root S 141m104.7 1 0.0 /usr/bin/enigma2 898 857 root S 141m104.7 1 0.0 /usr/bin/enigma2 937 857 root S N 141m104.7 0 0.0 /usr/bin/enigma2

6	English / VU+ - VU Duo Settopbox / Re:Media TVPro problems	am: März 23, 2012, 05:53:33 pm
There is this, now and then. Issues with memory? Uptime is now 7 days and that looks like it to be pretty maximum uptime to view T-channels with Sundtek. After reboot T-channels are Ok again. Drivers: Build date: Mar 5 2012 Code: Mem: 135260K used, 3080K free, 0K shrd, 0K buff, 36724K cached CPU: 2.8% usr 23.2% sys 0.0% nic 33.0% idle 22.7% io 0.0% irq 18.1% sirq Load average: 5.79 5.25 3.44 4/112 24030 PID PPID USER STAT VSZ %MEM CPU %CPU COMMAND 67 2 root RW 0 0.0 1 21.9 [sched_high] 23037 2 root SW 0 0.0 0 5.8 [kworker/0:0] 3 2 root SW 0 0.0 0 1.8 [ksoftirqd/0] 22707 849 root S 156m115.7 1 1.5 /usr/bin/enigma2 23610 849 root S 156m115.7 1 1.5 /usr/bin/enigma2 23921 2 root SW 0 0.0 1 1.5 [kworker/1:1] 23633 1 root S 114m 84.4 1 0.9 /opt/bin/mediasrv -d --no-nodes 860 849 root S 156m115.7 1 0.7 /usr/bin/enigma2 23644 849 root D 156m115.7 1 0.5 /usr/bin/enigma2 23945 23931 root R 2888 2.0 1 0.3 top 19 2 root RW 0 0.0 0 0.3 [kswapd0] 23451 849 root D 156m115.7 1 0.2 /usr/bin/enigma2 23926 581 root S 2664 1.9 1 0.1 /usr/sbin/dropbear -r /etc/dropbea 66 2 root SW 0 0.0 0 0.1 [sched_low] 20855 2 root SW 0 0.0 0 0.1 [kdvb-ad-0-fe-0] 852 849 root D 156m115.7 1 0.0 /usr/bin/enigma2 890 849 root S 156m115.7 1 0.0 /usr/bin/enigma2 935 849 root S N 156m115.7 1 0.0 /usr/bin/enigma2

7	English / VU+ - VU Duo Settopbox / Re:Vu + DUO support	am: März 11, 2012, 07:31:04 am
Thanks!

8	English / VU+ - VU Duo Settopbox / Re:Vu + DUO support	am: März 10, 2012, 03:46:40 pm
Is there some command which i can use to check version of my sundtek drivers? or how i can be sure that stick firmware is updated?

9	English / VU+ - VU Duo Settopbox / Cable recording issues	am: Dezember 15, 2011, 11:20:00 am
I got issues with cable recordings, in normal situation I use Sundtek as C tuner only for one cable channel and many many times, recordings hasn't work properly. 1. it has recorded maybe 10minutes from start 2. recording is just blackscreen and it stops immediately after trying to play it. 3. Record is pixelated, lot´s of glitches. All Cable channels which I use are FTA channels, so it is not any CAM issue. I have also used C-tuner channels as alternativate services for satellite channels and looks like when VU+ DUO has recorded from C-tuner issues are there. i haven´t tested not so much the issues, but looks like live TV wathing with Sundtek stick is Ok. All DVB-S2 works perfectly even if there is many recordings at the same time. Read/Write troughput from VU+ to NAS (so it is not network transfer issue): Code: Results for write throughput: 76.695 Mbit/s with udp,async,wsize=16384 76.695 Mbit/s with tcp,async,wsize=4096 67.108 Mbit/s with udp,async,wsize=8192 67.108 Mbit/s with udp,async,wsize=4096 67.108 Mbit/s with udp,async,wsize=32768 67.108 Mbit/s with tcp,async,wsize=8192 67.108 Mbit/s with tcp,async,wsize=32768 67.108 Mbit/s with tcp,async,wsize=16384 Results for read throughput: 89.478 Mbit/s with udp,async,rsize=8192 89.478 Mbit/s with udp,async,rsize=32768 89.478 Mbit/s with udp,async,rsize=16384 89.478 Mbit/s with tcp,async,rsize=8192 89.478 Mbit/s with tcp,async,rsize=4096 89.478 Mbit/s with tcp,async,rsize=32768 89.478 Mbit/s with tcp,async,rsize=16384 76.695 Mbit/s with udp,async,rsize=4096 Dev. drivers updated couple of days a go and it is tested with both Sundtek Pro sticks which i do have and image is now BH 1.6.6 Will powered USB hub give some advantages? PS. Same message (only shorter) is in BH forum, so you can ignore it from there.

10	English / VU+ - VU Duo Settopbox / Re:Do not get Pro stick to work now?	am: April 03, 2011, 03:31:08 pm
Zitat von: Sundtek am April 03, 2011, 03:20:12 pm you might follow our documentation: http://support.sundtek.com/index.php/topic,348.0.html Some Dreambox Sundtek Control Center versions are not compatible with VU+ Thank you again! That was easy to fix

11	English / VU+ - VU Duo Settopbox / Do not get Pro stick to work now?	am: April 03, 2011, 03:09:25 pm
Any hint for me? Before this i have been using stick in DVB-C mode on ViX image, and then i changed to VTi. I have VTi 2.5 installed and i have also installed Sundtek control center from plugins. When i try to start DVB-T stick i got message below: "It seems the sundtek driver is not installed or not installed properly. Install the driver now?" I have installed drivers and rebooted box several times, but allways same message. Looks like stick is recognized, but i do not see C tuner in menu. Code: root@bm750:~# /opt/bin/mediaclient -e ** List of Media Hardware Devices ** device 0: [ Sundtek MediaTV Pro] DVB-C, DVB-T, ANALOG-TV, FM-RADIO, REMOTE-CONT ROL, OSS-AUDIO, RDS [SERIAL]: ID: tek00166 [DVB-C]: FRONTEND: /dev/dvb/adapter1/frontend0 DVR: /dev/dvb/adapter1/dvr0 DMX: /dev/dvb/adapter1/demux0 [DVB-T]: FRONTEND: /dev/dvb/adapter1/frontend0 DVR: /dev/dvb/adapter1/dvr0 DMX: /dev/dvb/adapter1/demux0 [ANALOG-TV]: VIDEO0: /dev/video0 VBI0: /dev/vbi0 [FM-RADIO]: RADIO0: /dev/radio0 RDS: /dev/rds0 [REMOTECONTROL]: INPUT0: /dev/mediainput0 [OSS]: OSS0: /dev/dsp0

12	English / VU+ - VU Duo Settopbox / Re:Vu + DUO support	am: Februar 14, 2011, 01:26:04 pm
Zitat von: Sundtek am Februar 13, 2011, 10:42:05 pm Those are the latest drivers from our side. Sundtek Control Center .. there are different versions available as far as we know. The original version only works with the Dreambox, a modified one is supposed to work with the VU+. Ok, control center was from VIX downloads also, but i do not care anymore, becouse it works like a charm again

13	English / VU+ - VU Duo Settopbox / Re:Vu + DUO support	am: Februar 13, 2011, 02:54:30 pm
Zitat von: Sundtek am Februar 13, 2011, 02:01:40 pm There are currently no issues known, can you check the version of the installed driver? just run following on the console: Zitat /opt/bin/mediaclient --build Build date: Feb 9 2011 After VIX 2.0 installation i downloaded Sundtek control center ja drivers from there, C tuner didnt work, then i just download Drivers from VIX feed and now it works.

14	English / VU+ - VU Duo Settopbox / Re:Vu + DUO support	am: Februar 13, 2011, 11:21:16 am
Zitat von: rassi am Februar 13, 2011, 10:22:50 am Just a copy/paste from VIX forum Has anyone else experienced problems with Sundtek + Vix 2.0? I´m getting tune failed message now and then, there was no problem with Vix 1.3 Hi im getting the same issue with the sundtek sky ultimate DVB S usb tuner if I set my other tuners to not configured it works fine so, is this problem driver or VIX based, any thoughts? Now i tested drivers from VIX 2.0 plugins menu and looks like it is working now, so development drivers has to got some issues.

15	English / VU+ - VU Duo Settopbox / Re:Vu + DUO support	am: Februar 13, 2011, 10:22:50 am
Just a copy/paste from VIX forum Has anyone else experienced problems with Sundtek + Vix 2.0? I´m getting tune failed message now and then, there was no problem with Vix 1.3 Hi im getting the same issue with the sundtek sky ultimate DVB S usb tuner if I set my other tuners to not configured it works fine so, is this problem driver or VIX based, any thoughts?

Seiten: [1] 2