Sundtek Support Forum
Deutsch => Software Sundtek Ltd. => Thema gestartet von: hjt am Februar 02, 2011, 08:46:47 Nachmittag
-
Hallo,
mein WNDR3700 bietet nur 30MB in /tmp
siehe hier: http://support.sundtek.com/index.php/topic,345.msg2368.html#msg2368
Ich hätte hier einen patch geschrieben, welcher dieses Problem (zumindest bei mir) löst.
Getestet hab ich openwrtmipsr2 und 64bit.
--- sundtek_installer_development.sh.org 2011-02-02 14:19:42.037701596 +0100
+++ sundtek_installer_development.sh 2011-02-02 14:19:20.660701582 +0100
@@ -6,11 +6,14 @@
#
export _LANG="EN DE"
-_SIZE=28569
+_SIZE=28419
+_CHKFILES="chk32bit chk32bit23 chk64bit chkarmoabi chkarmsysv chkmips chkmipsel chkmipsel2 chkmipselbcm chkopenwrtmipsr2 chkppc32 chkppc64"
dialogbin=`which dialog >/dev/null 2>&1`
sttybin=`which stty >/dev/null 2>&1`
usedialog=0
+tarFiles=""
+appdir=$(pwd)
# using blacklist for opensource driver is recommended since the opensource
# driver is not stable and failed even our basic tests with a full system
@@ -186,23 +189,15 @@
}
extract_driver() {
- echo "Extracting driver ..."
app=$0
- dd if=${app} of=installer.tar.gz skip=1 bs=${_SIZE} 2> /dev/null
- if [ ! -f installer.tar.gz ]; then
- sed '1,796d' ${app} > /tmp/.sundtek/installer.tar.gz
+ cd $extractDir
+ dd if=${appdir}/${app} skip=1 bs=${_SIZE} 2> /dev/null | gzip -dc | tar xf - ${tarFiles}
+
+ if [ ! -f chk64bit ]; then
+ sed '1,790d' ${appdir}/${app} | gzip -dc | tar xf - ${tarFiles}
fi
- if [ "$busyboxfound" = "1" ]; then
- tar xzf installer.tar.gz 2>/dev/null 1>/dev/null
- if [ "$?" = "1" ]; then
- gzip -d installer.tar.gz
- tar xf installer.tar
- fi
- else
- tar xzmf installer.tar.gz 2>/dev/null 1>/dev/null
- fi
echo "done."
}
@@ -292,23 +287,13 @@
mkdir -p /tmp/.sundtek
- dd if=${app} of=/tmp/.sundtek/installer.tar.gz skip=1 bs=${_SIZE} 2> /dev/null
- if [ ! -f /tmp/.sundtek/installer.tar.gz ]; then
- echo "extracting..."
- sed '1,796d' ${app} > /tmp/.sundtek/installer.tar.gz
- fi
+ # extract chk* files
+ echo -n "extract chk files ... "
+ extractDir="/tmp/.sundtek"
+ tarFiles=${_CHKFILES}
+ extract_driver
- cd /tmp/.sundtek
- if [ "$busyboxfound" = "1" ]; then
- tar xzf installer.tar.gz 2>/dev/null 1>/dev/null
- if [ "$?" = "1" ]; then
- gzip -d installer.tar.gz
- tar xf installer.tar
- fi
- else
- tar xzmf installer.tar.gz 2>/dev/null 1>/dev/null
- fi
-
+ # checking system
echo -n "checking system... "
dm500hd=`grep -c 'dm500hd$' /proc/cpuinfo`
dm800=`grep -c 'dm800$' /proc/cpuinfo`
@@ -544,6 +529,15 @@
fi
fi
fi
+
+ # extract only required system archive
+ echo -n "extract ${SYSTEM} archive ... "
+ extractDir="/tmp/.sundtek"
+ tarFiles=${SYSTEM}/installer.tar.gz
+ rm -f ${extractDir}/chk*
+ extract_driver
+
+ # install driver
echo "installing..."
if [ "$vusolo" = "1" ]; then
cd /
@@ -767,7 +761,7 @@
case $1 in
-u) checkperm; uninstall_driver;;
-h) print_help;;
- -e) extract_driver;;
+ -e) extractDir="."; echo -n "Extracting driver ... "; extract_driver;;
-nolirc) NOLIRC=1; INSTALLDRIVER=1;;
-easyvdr) AUTO_INST=1; CHECKPERM=1; INSTALLDRIVER=1;;
-service) NOPREL=1; INSTALLDRIVER=1;;
Download-Link: hjt_installer_development.sh
http://www.speedshare.org/download.php?id=5077E86811
Download-Link: hjt_installer_development.diff
http://www.speedshare.org/download.php?id=634168DB11
./sundtek_installer_development.sh
Busybox installation
Welcome to the Sundtek linux driver setup
Legal notice:
This software comes without any warranty, use it at your own risk
Do you want to continue [Y/N]:
Nutzungsbedingungen:
Sundtek übernimmt keinerlei Haftung für Schäden welche eventuell durch
das System oder die angebotenen Dateien entstehen können.
Wollen Sie fortfahren [J/N]:
J
stopping old driver instance...
unpacking...
extract chk files ... done.
checking system... Netgear WNDR3700 detected
extract openwrtmipsr2 archive ... done.
installing...
Starting driver...
switching off loglevel
Enabling network support
done.
root@OpenWrt:/tmp# /tmp/opt/bin/mediasrv --build
Build date: Feb 2 2011
root@OpenWrt:/tmp# /tmp/opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [ Sundtek MediaTV Pro] DVB-C, DVB-T, ANALOG-TV, FM-RADIO, REMOTE-CONTROL, OSS-AUDIO, RDS
[DVB-C]:
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[DVB-T]:
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[ANALOG-TV]:
VIDEO0: /dev/video0
VBI0: /dev/vbi0
[FM-RADIO]:
RADIO0: /dev/radio0
RDS: /dev/rds0
[REMOTECONTROL]:
INPUT0: /dev/mediainput0
[OSS]:
OSS0: /dev/dsp0
-
danke für das Update, wir werden es jedoch nur hier im Forum belassen.
Der Installer ist eine sehr verzwickte Angelegenheit, da auf einigen Systemen einfach nicht alle Befehle vorhanden sind oder teilweise auch einfach nur Flags nicht vorhanden sind.
Wir arbeiten derzeit ebenfalls an einem iPad Client und werden uns die Installationsroutine noch etwas genauer ansehen bzw. was wir hier so machen können.
Das "umbiegen" des temporären Installpfades wäre wohl die einfachste Lösung.
-
danke für das Update, wir werden es jedoch nur hier im Forum belassen.
...
auf das hätte ich eigentlich geachtet, es ist kein Befehl hinzugekommen.
Eher Optionen weg.
Wichtig wäre nur, dass auf jeden system gzip installiert ist.
Kann ich natürlich nicht testen. Aber egal.
Das mit iPad klingt verdammt gut.
Ich hab nämlich eins :)
lg
Horst