Sundtek Support Forum

Deutsch => {Single, Dual, Quad} Sundtek SkyTV Ultimate => Thema gestartet von: mm93 am Juni 06, 2017, 06:54:51 Nachmittag

Titel: Tvheadend - Sporadische Aussetzer
Beitrag von: mm93 am Juni 06, 2017, 06:54:51 Nachmittag
Hallo,

irgendwie will es bei mir noch immer nicht so ganz klappen mit LiveTV...  :-[

Backend:
Tvheadend 4.2 stable (Screenshots der Config im Anhang) auf Raspberry Pi 2 mit Sundtek DVB S2 Ultimate IV (direkt am PI, ohne Verlängerung)

Frontend:
Raspberry Pi 3 mit OSMC Kodi 17 und Tvheadend Client Plugin

# /opt/bin/mediaclient --readsignal=0 -d /dev/dvb/adapter0/frontend0 --band universal
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 11361750   Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF


# mediaclient --build
Build date: 2017-05-18 21:05:56

Ich habe immer wieder das Problem, dass es plötzlich kurz ruckelt und ich auf dem Backend dann Continuity- und Transport Errors drauf habe. Die Fehler treten in sporadisch auf, es kann also sein, dass das ganze etwa 12 Stunden gut läuft und dann plötzlich wieder ein paar Transport- bzw. Continuity Fehler angezeigt werden. Das ganze teste ich mit ZDF neo HD bzw. ZDF HD im Dauertest.

Gibt es hier noch irgendwelche Einstellungen die ich vornehmen muss? Mittlerweile bin ich mit meinem Latein am Ende, zumal ich auch nicht weiß ob die Fehler vom Stick kommen, oder von woanders.

Ich bitte um Hilfe!

Beste Grüße
Markus

http://www.bilder-upload.eu/upload/b5aa36-1496767873.jpg (http://www.bilder-upload.eu/upload/b5aa36-1496767873.jpg)
http://www.bilder-upload.eu/show.php?file=ae13bf-1496768470.jpg (http://www.bilder-upload.eu/show.php?file=ae13bf-1496768470.jpg)
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: Sundtek am Juni 06, 2017, 10:37:14 Nachmittag
Erster Vorschlag wäre den Scheduler zu überprüfen und auf Performance zu schalten:

Das geht mit folgenden Befehlen unter Linux:

/opt/bin/mediaclient --cpucheck
/opt/bin/mediaclient --cpupush=performance

Bitte beachten dass dieser Befehl nach einem Reboot erneut ausgeführt werden muss.
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: mm93 am Juni 08, 2017, 11:17:40 Vormittag
Das mit der CPU wurde bereits durchgeführt - ohne Erfolg.
Da wir ja schon Kontakt über Skype gehabt haben, ich jedoch gestern keine Antwort mehr erhalten habe, schreibe ich nun wieder hier.
Mein Logs sehen folgendermaßen aus:

Mplayer:
root@raspberrypi:~# /opt/bin/mediaclient --cat /dev/dvb/adapter0/dvr0 | mplayer -ao null -vo -null -
MPlayer2 2.0-728-g2c378c7-4+b1 (C) 2000-2012 MPlayer Team
Cannot open file '/root/.mplayer/input.conf': No such file or directory
Failed to open /root/.mplayer/input.conf.
Cannot open file '/etc/mplayer/input.conf': No such file or directory
Failed to open /etc/mplayer/input.conf.

Playing -.
Reading from stdin...
Detected file format: MPEG-TS (MPEG-2 Transport Stream) (libavformat)
Cannot seek backward in linear streams!
Seek failed
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]non-existing SPS 0 referenced in buffering period
[h264 @ 0x7622b080]non-existing PPS 0 referenced
[h264 @ 0x7622b080]decode_slice_header error
[h264 @ 0x7622b080]no frame!


[mpegts @ 0x75bc25b8]Estimating duration from bitrate, this may be inaccurate
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (mp2), -aid 0, -alang deu
[lavf] stream 2: audio (mp2), -aid 1, -alang mis
[lavf] stream 3: audio (ac3), -aid 2, -alang deu
[lavf] stream 4: audio (mp2), -aid 3, -alang mul
[lavf] stream 5: subtitle (dvb-teletext), -sid 0, -slang deu
[lavf] stream 6: subtitle (dvbsub), -sid 1, -slang deu
LAVF: Program 11110
LAVF: Program 11130
Load subtitles in .
Error opening/initializing the selected video_out (-vo) device.

Selected audio codec: MPEG 1.0/2.0/2.5 layers I, II, III [mpg123]
AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000)
AO: [null] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A:33298.9 ( 9:14:58.9) of 0.0 (00.0)  2.3%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 14 got 2
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6322 expected 0 got 8
[mpegts @ 0x75bc25b8]Continuity check failed for pid 18 expected 0 got 1
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6320 expected 1 got 5
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6330 expected 3 got 11
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6321 expected 15 got 6
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6323 expected 5 got 13
[mpegts @ 0x75bc25b8]PES packet size mismatch
[mpegts @ 0x75bc25b8]PES packet size mismatch
[mpegts @ 0x75bc25b8]PES packet size mismatch
A:33299.1 ( 9:14:59.0) of 0.0 (00.0)  2.8%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 17 expected 5 got 6
[mpegts @ 0x75bc25b8]Continuity check failed for pid 0 expected 10 got 13
[mpegts @ 0x75bc25b8]Continuity check failed for pid 1 expected 10 got 13
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6300 expected 10 got 13
A:33301.1 ( 9:15:01.1) of 0.0 (00.0)  3.2%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 16 expected 7 got 11
A:33446.8 ( 9:17:26.7) of 0.0 (00.0)  7.5%
A:33447.0 ( 9:17:27.0) of 0.0 (00.0)  7.5%
A:33447.9 ( 9:17:27.8) of 0.0 (00.0)  7.5%
A:33448.0 ( 9:17:27.9) of 0.0 (00.0)  7.5%
A:33448.2 ( 9:17:28.2) of 0.0 (00.0)  7.5%
A:33448.3 ( 9:17:28.3) of 0.0 (00.0)  7.5%
A:33448.5 ( 9:17:28.5) of 0.0 (00.0)  7.5%
A:33448.7 ( 9:17:28.7) of 0.0 (00.0)  7.5%
A:33448.8 ( 9:17:28.8) of 0.0 (00.0)  7.5%
A:33449.1 ( 9:17:29.0) of 0.0 (00.0)  7.5%
A:33449.2 ( 9:17:29.1) of 0.0 (00.0)  7.5%
A:33449.4 ( 9:17:29.3) of 0.0 (00.0)  7.5%
A:33449.5 ( 9:17:29.4) of 0.0 (00.0)  7.5%
A:33449.7 ( 9:17:29.7) of 0.0 (00.0)  7.5%
A:33449.9 ( 9:17:29.9) of 0.0 (00.0)  7.5%
A:33728.5 ( 9:22:08.5) of 0.0 (00.0)  7.5%
A:33728.8 ( 9:22:08.7) of 0.0 (00.0)  7.5%
A:33729.0 ( 9:22:08.9) of 0.0 (00.0)  7.5%
A:33729.2 ( 9:22:09.1) of 0.0 (00.0)  7.5%
A:33729.4 ( 9:22:09.4) of 0.0 (00.0)  7.5%
A:33917.8 ( 9:25:17.8) of 0.0 (00.0)  7.6%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6322 expected 9 got 0
A:34876.7 ( 9:41:16.7) of 0.0 (00.0)  7.6%
A:34876.9 ( 9:41:16.9) of 0.0 (00.0)  7.6%
A:34877.0 ( 9:41:17.0) of 0.0 (00.0)  7.6%
A:34877.3 ( 9:41:17.2) of 0.0 (00.0)  7.6%
A:45077.8 (12:31:17.7) of 0.0 (00.0)  7.6%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6322 expected 15 got 6
A:67858.7 (18:50:58.6) of 0.0 (00.0)  7.6%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 1 got 4
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 5 got 6
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 7 got 3
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 4 got 6
[mpegts @ 0x75bc25b8]Continuity check failed for pid 0 expected 4 got 0
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6330 expected 7 got 4
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 7 got 3
[mpegts @ 0x75bc25b8]Continuity check failed for pid 18 expected 0 got 15
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6322 expected 7 got 6
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6321 expected 5 got 0
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6323 expected 12 got 7
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6320 expected 0 got 9
[mpegts @ 0x75bc25b8]Continuity check failed for pid 0 expected 1 got 11
[mpegts @ 0x75bc25b8]Continuity check failed for pid 1 expected 5 got 11
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6300 expected 5 got 11
[mpegts @ 0x75bc25b8]Continuity check failed for pid 17 expected 1 got 9
[mpegts @ 0x75bc25b8]Continuity check failed for pid 16 expected 2 got 6
A:75764.5 (21:02:44.5) of 0.0 (00.0) 18.5%
A:75764.8 (21:02:44.7) of 0.0 (00.0) 18.5%

A:75765.0 (21:02:45.0) of 0.0 (00.0) 18.5%
A:85864.6 (23:51:04.5) of 0.0 (00.0) 27.1%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6300 expected 2 got 8
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 0 got 11
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6322 expected 12 got 9
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6330 expected 9 got 3
[mpegts @ 0x75bc25b8]PES packet size mismatch
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6321 expected 14 got 10
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 8 got 7
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 14 got 10
[mpegts @ 0x75bc25b8]Continuity check failed for pid 18 expected 2 got 15
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6320 expected 5 got 7
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6330 expected 4 got 5
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6323 expected 4 got 2
[mpegts @ 0x75bc25b8]PES packet size mismatch
[mpegts @ 0x75bc25b8]Continuity check failed for pid 17 expected 6 got 7
[mpegts @ 0x75bc25b8]PES packet size mismatch
A:85864.8 (23:51:04.7) of 0.0 (00.0) 27.1%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 0 expected 2 got 3
[mpegts @ 0x75bc25b8]Continuity check failed for pid 1 expected 2 got 3
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6300 expected 9 got 3
A:86898.0 (24:08:18.0) of 0.0 (00.0) 27.9%
A:86898.1 (24:08:18.1) of 0.0 (00.0) 27.9%
A:86898.6 (24:08:18.6) of 0.0 (00.0) 27.9%
A:95443.0 (26:30:42.9) of 0.0 (00.0) 32.9%
[mpegts @ 0x75bc25b8]Invalid timestamps stream=0, pts=5696, dts=8589931284, size=90873
[mpegts @ 0x75bc25b8]Invalid timestamps stream=0, pts=2096, dts=8589933084, size=37044
A: 129.6 (02:09.5) of 0.0 (00.0) 33.0%

A:10301.8 ( 2:51:41.8) of 0.0 (00.0) 37.1%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 13 got 15
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 0 got 15
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6310 expected 0 got 8
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6330 expected 10 got 7
[mpegts @ 0x75bc25b8]PES packet size mismatch
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6323 expected 2 got 7
[mpegts @ 0x75bc25b8]Continuity check failed for pid 18 expected 15 got 14
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6321 expected 11 got 1
[mpegts @ 0x75bc25b8]Continuity check failed for pid 16 expected 9 got 14
[mpegts @ 0x75bc25b8]Continuity check failed for pid 17 expected 1 got 14
[mpegts @ 0x75bc25b8]Continuity check failed for pid 0 expected 12 got 5
[mpegts @ 0x75bc25b8]Continuity check failed for pid 1 expected 12 got 5
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6300 expected 12 got 5
[mpegts @ 0x75bc25b8]PES packet size mismatch
[mpegts @ 0x75bc25b8]Continuity check failed for pid 6331 expected 10 got 3
A:10307.0 ( 2:51:47.0) of 0.0 (00.0) 37.1%
[mpegts @ 0x75bc25b8]PES packet size mismatch
[NULL @ 0x7622b080]Junk in packet
A:13330.0 ( 3:42:10.0) of 0.0 (00.0) 38.2%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 18 expected 6 got 11
[mpegts @ 0x75bc25b8]Continuity check failed for pid 17 expected 7 got 10
A:13330.4 ( 3:42:10.4) of 0.0 (00.0) 38.2%
[mpegts @ 0x75bc25b8]Continuity check failed for pid 16 expected 5 got 7
A:18926.4 ( 5:15:26.3) of 0.0 (00.0) 39.8%
A:18926.6 ( 5:15:26.6) of 0.0 (00.0) 39.8%
A:18926.7 ( 5:15:26.7) of 0.0 (00.0) 39.8%
A:18926.8 ( 5:15:26.8) of 0.0 (00.0) 39.8%
^C18927.9 ( 5:15:27.9) of 0.0 (00.0) 39.8%


MPlayer interrupted by signal 2 in module: unknown

Exiting... (Quit)


mediasrv log:
root@raspberrypi:~# tail -f /var/log/mediasrv.log
2017-06-06 23:03:24 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-06 23:03:24 [528] Setting Frequency: 1611750
2017-06-06 23:03:24 [528] Frequency: 1611
2017-06-06 23:03:24 [528] Symbolrate: 22000
2017-06-06 23:03:24 [528] Checking lock
2017-06-06 23:03:24 [528] Checking lock
2017-06-06 23:03:24 [528] Checking lock
2017-06-06 23:03:24 [528] Checking lock
2017-06-06 23:03:24 [528] Checking lock
2017-06-06 23:03:24 [528] Frontend has locked
2017-06-07 08:41:41 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 08:41:41 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 08:41:41 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 08:41:41 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 08:41:41 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 08:41:41 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 08:41:41 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 08:41:41 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 08:41:41 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 08:41:41 [528] Setting Frequency: 1611750
2017-06-07 08:41:41 [528] Frequency: 1611
2017-06-07 08:41:41 [528] Symbolrate: 22000
2017-06-07 08:41:41 [528] Checking lock
2017-06-07 08:41:41 [528] Checking lock
2017-06-07 08:41:41 [528] Checking lock
2017-06-07 08:41:41 [528] Checking lock
2017-06-07 08:41:41 [528] Checking lock
2017-06-07 08:41:41 [528] Checking lock
2017-06-07 08:41:41 [528] Checking lock
2017-06-07 08:41:41 [528] Checking lock
2017-06-07 08:41:41 [528] Checking lock
2017-06-07 08:41:41 [528] Checking lock
2017-06-07 08:41:41 [528] Timeout reached no lock



2017-06-07 19:13:08 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 19:13:08 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 19:13:08 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 19:13:08 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 19:13:08 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 19:13:08 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 19:13:08 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 19:13:08 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 19:13:08 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 19:13:08 [528] FE GET EVENT DREAMBOX (CHECK REALLOCK)
2017-06-07 19:13:08 [528] Setting Frequency: 1611750
2017-06-07 19:13:08 [528] Frequency: 1611
2017-06-07 19:13:08 [528] Symbolrate: 22000
2017-06-07 19:13:09 [528] Checking lock
2017-06-07 19:13:09 [528] Checking lock
2017-06-07 19:13:09 [528] Checking lock
2017-06-07 19:13:09 [528] Checking lock
2017-06-07 19:13:09 [528] Checking lock
2017-06-07 19:13:09 [528] Checking lock
2017-06-07 19:13:09 [528] Checking lock
2017-06-07 19:13:09 [528] Checking lock
2017-06-07 19:13:09 [528] Checking lock
2017-06-07 19:13:09 [528] Checking lock
2017-06-07 19:13:09 [528] Frontend has locked


tvheadend log:
2017-06-06 21:38:54.934 subscription: 0004: "10.60.6.118 [ mm | Kodi Media Center ]" unsubscribing from "RTL2", hostname="10.60.6.118", username="mm", client="Kodi Media Center"
2017-06-06 21:38:55.014 mpegts: 12544.75H in maurer.local - tuning on Sundtek DVB-S/S2 (IV) #0 : DVB-S #0
2017-06-06 21:38:55.494 subscription: 0005: "10.60.6.118 [ mm | Kodi Media Center ]" subscribing on channel "ProSieben", weight: 150, adapter: "Sundtek DVB-S/S2 (IV) #0 : DVB-S #0", network: "maurer.local", mux: "12544.75H", provider: "ProSiebenSat.1", service: "ProSieben", profile="htsp", hostname="10.60.6.118", username="mm", client="Kodi Media Center"
2017-06-06 21:39:32.866 subscription: 0005: "10.60.6.118 [ mm | Kodi Media Center ]" unsubscribing from "ProSieben", hostname="10.60.6.118", username="mm", client="Kodi Media Center"
2017-06-06 21:39:32.945 mpegts: 12187.5H in maurer.local - tuning on Sundtek DVB-S/S2 (IV) #0 : DVB-S #0
2017-06-06 21:39:33.426 subscription: 0006: "10.60.6.118 [ mm | Kodi Media Center ]" subscribing on channel "RTL2", weight: 150, adapter: "Sundtek DVB-S/S2 (IV) #0 : DVB-S #0", network: "maurer.local", mux: "12187.5H", provider: "CBC", service: "RTL2", profile="htsp", hostname="10.60.6.118", username="mm", client="Kodi Media Center"
2017-06-06 21:45:46.014 tsfix: The timediff for DVBSUB is big (300980), using audio dts
2017-06-06 22:20:36.152 TS: maurer.local/12187.5H/RTL2 Transport error indicator (total 1)
2017-06-06 22:20:36.152 TS: maurer.local/12187.5H/RTL2: MPEG2VIDEO @ #166 Continuity counter error (total 1)
2017-06-06 22:20:36.152 TS: maurer.local/12187.5H/RTL2: MPEG2AUDIO @ #128 Continuity counter error (total 1)
2017-06-06 23:03:23.795 subscription: 0006: "10.60.6.118 [ mm | Kodi Media Center ]" unsubscribing from "RTL2", hostname="10.60.6.118", username="mm", client="Kodi Media Center"
2017-06-06 23:03:23.884 mpegts: 11361.75H in maurer.local - tuning on Sundtek DVB-S/S2 (IV) #0 : DVB-S #0
2017-06-06 23:03:24.652 subscription: 0007: "10.60.6.118 [ mm | Kodi Media Center ]" subscribing on channel "zdf_neo HD", weight: 150, adapter: "Sundtek DVB-S/S2 (IV) #0 : DVB-S #0", network: "maurer.local", mux: "11361.75H", provider: "ZDFvision", service: "zdf_neo HD", profile="htsp", hostname="10.60.6.118", username="mm", client="Kodi Media Center"
2017-06-06 23:15:54.262 tsfix: The timediff for DVBSUB is big (429322), using audio dts
2017-06-06 23:15:59.082 TS: maurer.local/11361.75H/zdf_neo HD: AC3 @ #6322 Continuity counter error (total 1)
2017-06-07 01:24:13.746 tsfix: transport stream TELETEXT, DTS discontinuity. DTS = 760396829, last = 760398421
2017-06-07 02:21:59.079 TS: maurer.local/11361.75H/zdf_neo HD: AC3 @ #6322 Continuity counter error (total 2)
2017-06-07 08:41:41.239 TS: maurer.local/11361.75H/zdf_neo HD Transport error indicator (total 1)
2017-06-07 08:41:41.242 TS: maurer.local/11361.75H/zdf_neo HD: H264 @ #6310 Continuity counter error (total 1)
2017-06-07 08:41:41.301 linuxdvb: Sundtek DVB-S/S2 (IV) #0 : DVB-S #0 - retune
2017-06-07 08:41:41.895 TS: maurer.local/11361.75H/zdf_neo HD: TELETEXT @ #6330 Continuity counter error (total 1)
2017-06-07 08:41:41.895 TS: maurer.local/11361.75H/zdf_neo HD: AC3 @ #6322 Continuity counter error (total 3)
2017-06-07 08:41:41.896 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6321 Continuity counter error (total 1)
2017-06-07 08:41:41.896 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6323 Continuity counter error (total 1)
2017-06-07 08:41:41.896 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6320 Continuity counter error (total 1)
2017-06-07 08:41:41.912 tsfix: transport stream TELETEXT, DTS discontinuity. DTS = 3122736629, last = 3122533229
2017-06-07 08:41:41.927 tsfix: transport stream H264, DTS discontinuity. DTS = 3122781625, last = 3122576425
2017-06-07 08:41:42.050 tsfix: transport stream MPEG2AUDIO, DTS discontinuity. DTS = 3122739307, last = 3122521147
2017-06-07 08:41:42.050 tsfix: transport stream MPEG2AUDIO, DTS discontinuity. DTS = 3122741107, last = 3122522947
2017-06-07 08:41:42.135 tsfix: transport stream MPEG2AUDIO, DTS discontinuity. DTS = 3122748667, last = 3122530507
2017-06-07 08:41:42.273 tsfix: transport stream AC3, DTS discontinuity. DTS = 3122755200, last = 3122521920
2017-06-07 13:41:45.821 TS: maurer.local/11361.75H/zdf_neo HD Transport error indicator (total 8)
2017-06-07 13:41:45.821 TS: maurer.local/11361.75H/zdf_neo HD: H264 @ #6310 Continuity counter error (total 6)
2017-06-07 13:41:45.821 TS: maurer.local/11361.75H/zdf_neo HD: AC3 @ #6322 Continuity counter error (total 4)
2017-06-07 13:41:45.821 TS: maurer.local/11361.75H/zdf_neo HD: TELETEXT @ #6330 Continuity counter error (total 2)
2017-06-07 13:41:45.821 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6321 Continuity counter error (total 2)
2017-06-07 13:41:45.821 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6320 Continuity counter error (total 2)
2017-06-07 13:41:45.821 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6323 Continuity counter error (total 2)
2017-06-07 16:21:25.141 tsfix: transport stream TELETEXT, DTS discontinuity. DTS = -2984711763, last = 5605224837
2017-06-07 19:13:06.735 TS: maurer.local/11361.75H/zdf_neo HD Transport error indicator (total 15)
2017-06-07 19:13:06.735 TS: maurer.local/11361.75H/zdf_neo HD: H264 @ #6310 Continuity counter error (total 9)
2017-06-07 19:13:08.644 linuxdvb: Sundtek DVB-S/S2 (IV) #0 : DVB-S #0 - retune
2017-06-07 19:13:09.285 TS: maurer.local/11361.75H/zdf_neo HD: TELETEXT @ #6330 Continuity counter error (total 4)
2017-06-07 19:13:09.285 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6323 Continuity counter error (total 3)
2017-06-07 19:13:09.285 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6321 Continuity counter error (total 3)
2017-06-07 19:13:09.285 tsfix: transport stream TELETEXT, DTS discontinuity. DTS = -2057335563, last = 6532366829
2017-06-07 19:13:09.313 tsfix: transport stream H264, DTS discontinuity. DTS = -2057290567, last = 6532413625
2017-06-07 19:13:09.327 TS: maurer.local/11361.75H/zdf_neo HD: DVBSUB @ #6331 Continuity counter error (total 1)
2017-06-07 19:13:09.486 tsfix: transport stream AC3, DTS discontinuity. DTS = -2057331392, last = 6532369920
2017-06-07 19:13:09.502 tsfix: transport stream MPEG2AUDIO, DTS discontinuity. DTS = -2057323525, last = 6532360507
2017-06-07 19:13:09.535 tsfix: transport stream MPEG2AUDIO, DTS discontinuity. DTS = -2057322085, last = 6532361947
2017-06-07 19:13:09.555 tsfix: transport stream MPEG2AUDIO, DTS discontinuity. DTS = -2057320285, last = 6532363747
2017-06-07 22:12:50.294 TS: maurer.local/11361.75H/zdf_neo HD: AC3 @ #6322 Continuity counter error (total 5)
2017-06-07 22:38:41.211 TS: maurer.local/11361.75H/zdf_neo HD: H264 @ #6310 Continuity counter error (total 12)
2017-06-07 22:38:41.211 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6320 Continuity counter error (total 3)
2017-06-07 22:38:41.211 TS: maurer.local/11361.75H/zdf_neo HD Transport error indicator (total 18)
2017-06-07 22:38:41.211 TS: maurer.local/11361.75H/zdf_neo HD: AC3 @ #6322 Continuity counter error (total 6)
2017-06-07 22:38:41.232 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6323 Continuity counter error (total 4)
2017-06-07 22:38:41.232 TS: maurer.local/11361.75H/zdf_neo HD: TELETEXT @ #6330 Continuity counter error (total 5)
2017-06-07 22:38:41.232 TS: maurer.local/11361.75H/zdf_neo HD: MPEG2AUDIO @ #6321 Continuity counter error (total 4)
2017-06-07 22:38:41.285 TS: maurer.local/11361.75H/zdf_neo HD: DVBSUB @ #6331 Continuity counter error (total 2)




Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: mm93 am Juni 09, 2017, 04:07:38 Nachmittag
nvm
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: adiausberlin am Dezember 21, 2017, 10:37:44 Nachmittag
Gab es eine Lösung für das Problem?
Hab ebenfalls Abbrüche auf meinem Raspberry Pi 3B mit DVB-C (siehe Log).

cat /var/log/mediasrv.log nach einem reboot
2017-12-21 21:52:00 [397] Setting Frequency: 130000000
2017-12-21 21:52:00 [397] Setting Symbolrate: 6900000
2017-12-21 21:52:00 [397] Setting Modulation: 5
2017-12-21 21:52:00 [397] setting symbolrate: 6900
2017-12-21 21:52:00 [397] Tuning DVB-C Frequency: 130000000
2017-12-21 21:52:00 [397] Checking lock
2017-12-21 21:52:00 [397] Frontend has locked
2017-12-21 21:52:02 [397] Setting Frequency: 394000000
2017-12-21 21:52:02 [397] Setting Frequency: 394000000
2017-12-21 21:52:02 [397] Setting Symbolrate: 6900000
2017-12-21 21:52:02 [397] Setting Modulation: 5
2017-12-21 21:52:02 [397] setting symbolrate: 6900
2017-12-21 21:52:02 [397] Tuning DVB-C Frequency: 394000000
2017-12-21 21:52:02 [397] Checking lock
2017-12-21 21:52:02 [397] TS Sync byte not aligned, realigning stream (0 // 0)
2017-12-21 21:52:02 [397] Frontend has locked
2017-12-21 21:52:04 [397] Setting Frequency: 394000000
2017-12-21 21:52:04 [397] Setting Frequency: 394000000
2017-12-21 21:52:04 [397] Setting Symbolrate: 6900000
2017-12-21 21:52:04 [397] Setting Modulation: 5
2017-12-21 21:52:04 [397] setting symbolrate: 6900
2017-12-21 21:52:04 [397] Tuning DVB-C Frequency: 394000000
2017-12-21 21:52:04 [397] Checking lock
2017-12-21 21:52:04 [397] TS Sync byte not aligned, realigning stream (0 // 0)
2017-12-21 21:52:04 [397] TS Sync byte not aligned, realigning stream (313 // 0)
2017-12-21 21:52:04 [397] Frontend has locked
2017-12-21 21:52:37 [397] Setting Frequency: 394000000
2017-12-21 21:52:37 [397] Setting Frequency: 394000000
2017-12-21 21:52:37 [397] Setting Symbolrate: 6900000
2017-12-21 21:52:37 [397] Setting Modulation: 5
2017-12-21 21:52:37 [397] setting symbolrate: 6900
2017-12-21 21:52:37 [397] Tuning DVB-C Frequency: 394000000
2017-12-21 21:52:37 [397] Checking lock
2017-12-21 21:52:37 [397] Frontend has locked
2017-12-21 21:52:37 [397] TS Sync byte not aligned, realigning stream (0 // 0)
2017-12-21 21:52:37 [397] TS Sync byte not aligned, realigning stream (227 // 0)
2017-12-21 21:52:39 [397] Setting Frequency: 114000000
2017-12-21 21:52:39 [397] Setting Symbolrate: 6900000
2017-12-21 21:52:39 [397] Setting Modulation: 5
2017-12-21 21:52:39 [397] setting symbolrate: 6900
2017-12-21 21:52:39 [397] Tuning DVB-C Frequency: 114000000
2017-12-21 21:52:39 [397] Checking lock
2017-12-21 21:52:39 [397] Frontend has locked
2017-12-21 21:52:45 [397] Setting Frequency: 122000000
2017-12-21 21:52:45 [397] Setting Symbolrate: 6900000
2017-12-21 21:52:45 [397] Setting Modulation: 3
2017-12-21 21:52:45 [397] setting symbolrate: 6900
2017-12-21 21:52:45 [397] Tuning DVB-C Frequency: 122000000
2017-12-21 21:52:45 [397] Checking lock
2017-12-21 21:52:45 [397] Frontend has locked
2017-12-21 21:52:50 [397] Setting Frequency: 130000000
2017-12-21 21:52:50 [397] Setting Symbolrate: 6900000
2017-12-21 21:52:50 [397] Setting Modulation: 5
2017-12-21 21:52:50 [397] setting symbolrate: 6900
2017-12-21 21:52:50 [397] Tuning DVB-C Frequency: 130000000
2017-12-21 21:52:50 [397] Checking lock
2017-12-21 21:52:50 [397] Frontend has locked
2017-12-21 21:53:03 [397] Setting Frequency: 322000000
2017-12-21 21:53:03 [397] Setting Symbolrate: 6900000
2017-12-21 21:53:03 [397] Setting Modulation: 5
2017-12-21 21:53:03 [397] setting symbolrate: 6900
2017-12-21 21:53:03 [397] Tuning DVB-C Frequency: 322000000
2017-12-21 21:53:04 [397] Checking lock
2017-12-21 21:53:04 [397] Checking lock
2017-12-21 21:53:04 [397] Checking lock
2017-12-21 21:53:05 [397] Checking lock
2017-12-21 21:53:06 [397] Checking lock
2017-12-21 21:53:06 [397] Checking lock
2017-12-21 21:53:07 [397] Checking lock
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: Sundtek am Dezember 21, 2017, 11:12:37 Nachmittag
/opt/bin/mediaclient --lc

Eventuell greifen dort mehrere Programme gleichzeitig auf den Tuner zu.

Es gab mal nen EPG Scan Bug bei TVHeadend, in der Logfile sehe ich keinen Fehler - bekannt ist hier auch nichts.

Den EPG Scan kann man in TVHeadend ausschalten.
Du siehst in der Logfile das aktiv umgeschalten wird wenn du da gerade streamst dann wird natürlich der ursprüngliche Stream abgebrochen.
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: adiausberlin am Januar 09, 2018, 10:11:36 Nachmittag
Ich verwende seit Dezember den Streaming Server von euch. Das Problem hatte ich mit TVHeadend ebenfalls. Heute habe ich den Server aktualisiert und habe leider immer noch sporadisch den Fehler.

cat /var/log/mediasrv.log
2018-01-09 20:58:46 [414] Setting Frequency: 394000000
2018-01-09 20:58:46 [414] Setting Frequency: 394000000
2018-01-09 20:58:46 [414] Setting Symbolrate: 6900000
2018-01-09 20:58:46 [414] Setting Modulation: 5
2018-01-09 20:58:46 [414] setting symbolrate: 6900
2018-01-09 20:58:46 [414] Tuning DVB-C Frequency: 394000000
2018-01-09 20:58:46 [414] Checking lock
2018-01-09 20:58:46 [414] Frontend has locked
2018-01-09 20:58:46 [414] TS Sync byte not aligned, realigning stream (0 // 0)
2018-01-09 20:58:46 [414] TS Sync byte not aligned, realigning stream (246 // 0)
2018-01-09 20:58:48 [414] Setting Frequency: 394000000
2018-01-09 20:58:48 [414] Setting Frequency: 394000000
2018-01-09 20:58:48 [414] Setting Symbolrate: 6900000
2018-01-09 20:58:48 [414] Setting Modulation: 5
2018-01-09 20:58:48 [414] setting symbolrate: 6900
2018-01-09 20:58:48 [414] Tuning DVB-C Frequency: 394000000
2018-01-09 20:58:48 [414] Checking lock
2018-01-09 20:58:48 [414] TS Sync byte not aligned, realigning stream (0 // 0)
2018-01-09 20:58:48 [414] Frontend has locked
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: Sundtek am Januar 09, 2018, 10:47:14 Nachmittag
Das sind doch keine Fehler, du schaltest nur um?
Was ist denn jetzt das Problem.
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: adiausberlin am Januar 13, 2018, 10:16:41 Nachmittag
Sry für die späte Antwort.
In der Log steh anscheinend nichts, was auf einen Fehler hinweist...

Als die Log erstellt wurde, hab ich umgeschaltet und nach 2 sec. ist das Bild eingefroren. In Kodi ist der Ladebalken zu sehen mit 0%.
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: Sundtek am Januar 13, 2018, 10:18:51 Nachmittag
Hast du die Codecs gekauft? Wie sieht die CPU Last aus?
Wobei die HD Sender brauchen eigentlich überhaupt keine Codecs...

Wir verwenden üblicherweise eine Android Box mit Kodi als Client.
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: adiausberlin am Januar 17, 2018, 10:32:30 Nachmittag
Ja, die Codecs sind gekauft.
RAM ist noch ca. 870 MB frei und die CPU Last liegt insgesamt bei ca. 3-5 %.

Ich warte aktuell noch auf einen Aussetzer  :) um die Debug Log von Kodi prüfen zu können.

Es könnte ja auch ein WLAN Treiber Bug (Clientseitig) sein.

(Streaming-Server liegt auf einen Pi 3B (per LAN verbunden)
Client ist ein Pi 2B (per WLAN verbunden))
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: Sundtek am Januar 17, 2018, 11:24:13 Nachmittag
ok beim W-Lan kann es __IMMER__ zu Aussetzern kommen. Da muss nur Dein Nachbar das W-Lan etwas stärker auslasten (und in Berlin gibt's üblicherweise viele Nachbarn)

Da gibt's nur 2 Dinge die Du machen kannst:
1. Dich mit Aussetzern hin und wieder arrangieren
2. ein Lan Kabel legen.
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: viper4st am Februar 01, 2018, 05:13:33 Nachmittag
Hallo,

ich habe leider ähnliche Probleme mit Aussetzern, und um es vorweg zu nehmen, nicht nur in Verbindung mit TVHeadend.
Sorry, für den langen Text, aber ich hoffe, dass viele Infos helfen das Problem einzugrenzen.

Ich habe folgenden Aufbau:

WeTek Play 2, CPU Amlogic S905
LibreElec 8.2.2, Kernel 3.14.29, Kodi 17.6
Dual Boot Installation, d.h. im NAND Flash ist weiterhin das WeOS und LibreElec bootet von SD-Karte
Tvheadend 4.2.3-20 ~ LibreELEC Tvh-addon v8.2.112


Sundtek SkyTV Ultimate 6 2016 am seitlichen USB 2.0 Slot, hinten USB-Stick für Aufnahmen (schreibt mit ca. 16 MByte/s), keine Stromversorgung.
Triax CKR 5x8 Multischalter mit aktiver Stromversorgung.

Sundtek Treiber Addon aus LibreElec Repository installiert und danach aktualisiert auf den Stand vom 15.01.2018.


Danach war der Tuner sofort in TVHeadend sichtbar und konnte verwendet werden. Bis dahin war alles super.

Leider musste ich nach kurzer Zeit feststellen, dass das Bild beim Live schauen via Kodi/TVHeadend immer wieder Hänger hat. Gerade bei HD immer so im Abstand von 0,5 - 2 min, aber nicht unbedingt regelmäßig.
Bei SD seltener, vielleicht so alle 10-20 min. Eventuell hängt das auch vom ausgestrahlten Material ab, wie groß also die Bandbreite ist.

Im TVHeadend hat man das anhand von Kontinuitätsfehlern und am Einbrechen der Bandbreite gut sehen können.
Da es wohl im TVHeadend laut Forum immer wieder mal solche Probleme gibt, habe ich mal den Sundtek Streamingserver installiert und gestartet.
Diesen dann per Webinterface konfiguriert und im Kodi das "PVR IPTV Simple Client" Addon installiert und die Kanäle als HTTP Streams eingebunden.

Somit konnte ich dann in Kodi unabhängig von TVHeadend, also rein über den Sundtek Streamingserver und den Sundtek Treiber die Kanäle anschauen.
Aber auch hier das gleiche Problem, somit kann TVHeadend als Grund eigentlich ausgeschlossen werden. Weiterhin habe ich die Streams per VLC über Netzwerk getestet (WeTek und Client über Kabel an Netzwerkswitch, beides Gigabit angeschlossen) -> gleiches Problem, somit kann auch Kodi als Grund ausgeschlossen werden.
Die Stromversorgung am Sundtek Tuner anzuschließen hat ebenfalls keinen Unterschied gemacht.
Auch das Umschalten des CPU Schedulers auf Performance über "mediaclient --cpupush=performance" hat nichts am Problem geändert.

Mit dem internen Tuner gibt es nebenbei bemerkt keine Probleme, auch das Tauschen der SAT-Kabel zwischen internen Tuner und Sundtek Tuner hat nicht geholfen.
Bei beiden Anschlüssen gab es keine Probleme mit dem internen Tuner. Die SAT-Anlage würde ich als Grund also ebenfalls ausschließen.

Signalqualität am Sundtek Tuner ist laut TVHeadend gut, sogar besser als beim internen Tuner.

Dann ist mir aber folgendes aufgefallen:
Immer wenn diese Aussetzer passieren, läuft der mediasrv Dienst des Sundtek Treibers auf annähernd 100% CPU-Last auf einem der 4 Cores.
Ansonsten liegt die Last bei 2-5%.

Ich habe das mal in folgendem Video aufgezeichnet:
https://www.youtube.com/watch?v=w9YrLZ9nkQw

Ich habe auch mal das Loglevel in der sundtek.conf auf max gestellt.
In der Zeit des angehangenen mediasrv.log Ausschnitts lief die ganze Zeit VLC, der den Stream von ZDF Info über den rtspd daemon abgerufen hat.
Die Zeitpunkte, zu denen die Logeinträge entstanden sind, passen so ziemlich genau mit der 100% Auslastung des mediasrv Dienstes zusammen.
So wie es aussieht scheint er einmal den TS Stream zu reseten (Resetting TS Port FE1) und zum anderen den Kanal neu einzustellen, aber nicht zwingend immer beides zusammen. Am Ende des Logs sind z.B. nur TS Resets.
Aber in beiden Fällen führt es zu den Aussetzern.
Danach habe ich das Ganze nochmal über TVHeadend getestet (rtspd war zu der Zeit gestoppt, um eine Doppelbelegung des Tuners zu verhindern). Einmal per VLC Client als HTTP Stream und auch mal eine programmierte Aufnahme. In beiden Fällen kam nur die Meldung mit den TS Resets. Die scheinen also der gemeinsame Nenner und ein Indiz für das Problem sein.
D.h. folgende beiden Zeilen passen zu den Aussetzern:
 Resetting TS Port FE1 (1)
 TS Sync byte not aligned, realigning stream (* // *)



Weiterhin habe ich zufällig einen Thread gefunden, bei dem es bei der WeTek Play 1 um Probleme mit der USB-Schnittstelle in Verbindung mit Sundtek Tunern ging:
http://www.wetekforums.com/v/discussion/506/sundtek-dvb-s-s2-stick-openelec-tvheadend

Könnte das hier auch eine Rolle spielen.


Was kann ich tun? Ich weiß nicht mehr weiter.

Vielen Dank

UPDATE:
Das Kanal Einstellen im ersten Log könnte eventuell das automatische EPG vom rtspd sein. Mir fällt nämlich gerade auf, dass das verschiedene Frequenzen sind.
D.h. die spielen hier keine Rolle. Es geht also rein um die TS Resets
UPDATE ENDE


mediasrv.log während VLC Stream über rtspd:

2018-02-01 15:00:54 [22040] Disabling High Tone (22khz)
2018-02-01 15:00:54 [22040] Set Voltage Vertical (13V)
2018-02-01 15:00:54 [22040] Setting Frequency: 1288000
2018-02-01 15:00:54 [22040] Frequency: 1288
2018-02-01 15:00:54 [22040] Symbolrate: 22000
2018-02-01 15:00:54 [22040] Checking lock
2018-02-01 15:00:54 [22040] Frontend has locked
2018-02-01 15:00:54 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:01:04 [22040] Enabling High Tone (22khz)
2018-02-01 15:01:04 [22040] Set Voltage Vertical (13V)
2018-02-01 15:01:04 [22040] Setting Frequency: 1295000
2018-02-01 15:01:04 [22040] Frequency: 1295
2018-02-01 15:01:04 [22040] Symbolrate: 29700
2018-02-01 15:01:05 [22040] Checking lock
2018-02-01 15:01:05 [22040] Checking lock
2018-02-01 15:01:05 [22040] Checking lock
2018-02-01 15:01:05 [22040] Checking lock
2018-02-01 15:01:05 [22040] Checking lock
2018-02-01 15:01:05 [22040] Frontend has locked
2018-02-01 15:01:08 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:01:08 [22040] TS Sync byte not aligned, realigning stream (0 // 140)
2018-02-01 15:01:13 [22040] Disabling High Tone (22khz)
2018-02-01 15:01:13 [22040] Set Voltage Horizontal (18V)
2018-02-01 15:01:13 [22040] Setting Frequency: 1302750
2018-02-01 15:01:13 [22040] Frequency: 1302
2018-02-01 15:01:13 [22040] Symbolrate: 22000
2018-02-01 15:01:14 [22040] Checking lock
2018-02-01 15:01:14 [22040] Frontend has locked
2018-02-01 15:01:44 [22040] Enabling High Tone (22khz)
2018-02-01 15:01:44 [22040] Set Voltage Horizontal (18V)
2018-02-01 15:01:44 [22040] Setting Frequency: 1314500
2018-02-01 15:01:44 [22040] Frequency: 1314
2018-02-01 15:01:44 [22040] Symbolrate: 27500
2018-02-01 15:01:44 [22040] Checking lock
2018-02-01 15:01:44 [22040] Checking lock
2018-02-01 15:01:44 [22040] Checking lock
2018-02-01 15:01:44 [22040] Checking lock
2018-02-01 15:01:44 [22040] Checking lock
2018-02-01 15:01:44 [22040] Checking lock
2018-02-01 15:01:44 [22040] Checking lock
2018-02-01 15:01:44 [22040] Checking lock
2018-02-01 15:01:44 [22040] Disabling High Tone (22khz)
2018-02-01 15:01:44 [22040] Set Voltage Vertical (13V)
2018-02-01 15:01:44 [22040] Setting Frequency: 1317500
2018-02-01 15:01:44 [22040] Frequency: 1317
2018-02-01 15:01:44 [22040] Symbolrate: 22000
2018-02-01 15:01:45 [22040] Checking lock
2018-02-01 15:01:45 [22040] Frontend has locked
2018-02-01 15:01:49 [22040] Disabling High Tone (22khz)
2018-02-01 15:01:49 [22040] Set Voltage Horizontal (18V)
2018-02-01 15:01:49 [22040] Setting Frequency: 1332250
2018-02-01 15:01:49 [22040] Frequency: 1332
2018-02-01 15:01:49 [22040] Symbolrate: 22000
2018-02-01 15:01:49 [22040] Checking lock
2018-02-01 15:01:49 [22040] Frontend has locked
2018-02-01 15:02:06 [22040] Enabling High Tone (22khz)
2018-02-01 15:02:06 [22040] Set Voltage Vertical (13V)
2018-02-01 15:02:06 [22040] Setting Frequency: 1334000
2018-02-01 15:02:06 [22040] Frequency: 1334
2018-02-01 15:02:06 [22040] Symbolrate: 29700
2018-02-01 15:02:07 [22040] Checking lock
2018-02-01 15:02:07 [22040] Checking lock
2018-02-01 15:02:07 [22040] Checking lock
2018-02-01 15:02:07 [22040] Checking lock
2018-02-01 15:02:07 [22040] Frontend has locked
2018-02-01 15:02:11 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:02:11 [22040] TS Sync byte not aligned, realigning stream (0 // 64)
2018-02-01 15:02:11 [22040] TS Sync byte not aligned, realigning stream (299 // 64)
2018-02-01 15:02:14 [22040] Disabling High Tone (22khz)
2018-02-01 15:02:14 [22040] Set Voltage Horizontal (18V)
2018-02-01 15:02:14 [22040] Setting Frequency: 1743750
2018-02-01 15:02:14 [22040] Frequency: 1743
2018-02-01 15:02:14 [22040] Symbolrate: 22000
2018-02-01 15:02:14 [22040] Checking lock
2018-02-01 15:02:14 [22040] Checking lock
2018-02-01 15:02:14 [22040] Checking lock
2018-02-01 15:02:14 [22040] Checking lock
2018-02-01 15:02:14 [22040] Checking lock
2018-02-01 15:02:14 [22040] Checking lock
2018-02-01 15:02:14 [22040] Frontend has locked
2018-02-01 15:02:17 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:02:17 [22040] TS Sync byte not aligned, realigning stream (0 // 76)
2018-02-01 15:02:17 [22040] TS Sync byte not aligned, realigning stream (227 // 76)
2018-02-01 15:02:22 [22040] Disabling High Tone (22khz)
2018-02-01 15:02:22 [22040] Set Voltage Vertical (13V)
2018-02-01 15:02:22 [22040] Setting Frequency: 1597000
2018-02-01 15:02:22 [22040] Frequency: 1597
2018-02-01 15:02:22 [22040] Symbolrate: 22000
2018-02-01 15:02:22 [22040] Checking lock
2018-02-01 15:02:22 [22040] Checking lock
2018-02-01 15:02:22 [22040] Checking lock
2018-02-01 15:02:22 [22040] Checking lock
2018-02-01 15:02:22 [22040] Checking lock
2018-02-01 15:02:22 [22040] Checking lock
2018-02-01 15:02:22 [22040] Checking lock
2018-02-01 15:02:22 [22040] Frontend has locked
2018-02-01 15:03:23 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:03:24 [22040] TS Sync byte not aligned, realigning stream (0 // 20)
2018-02-01 15:03:30 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:03:30 [22040] TS Sync byte not aligned, realigning stream (0 // 4)
2018-02-01 15:03:30 [22040] TS Sync byte not aligned, realigning stream (245 // 4)
2018-02-01 15:04:44 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:04:44 [22040] TS Sync byte not aligned, realigning stream (0 // 92)
2018-02-01 15:05:20 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:05:20 [22040] TS Sync byte not aligned, realigning stream (0 // 12)
2018-02-01 15:05:20 [22040] TS Sync byte not aligned, realigning stream (222 // 12)
2018-02-01 15:05:46 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:05:46 [22040] TS Sync byte not aligned, realigning stream (0 // 80)
2018-02-01 15:05:46 [22040] TS Sync byte not aligned, realigning stream (191 // 80)
2018-02-01 15:06:02 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:06:02 [22040] TS Sync byte not aligned, realigning stream (0 // 28)
2018-02-01 15:06:02 [22040] TS Sync byte not aligned, realigning stream (189 // 28)
2018-02-01 15:06:02 [22040] TS Sync byte not aligned, realigning stream (393 // 28)
2018-02-01 15:06:02 [22040] TS Sync byte not aligned, realigning stream (654 // 28)
2018-02-01 15:06:20 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:06:20 [22040] TS Sync byte not aligned, realigning stream (0 // 64)
2018-02-01 15:06:58 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:06:58 [22040] TS Sync byte not aligned, realigning stream (0 // 68)
2018-02-01 15:07:08 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:07:08 [22040] TS Sync byte not aligned, realigning stream (0 // 44)
2018-02-01 15:07:32 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:07:32 [22040] TS Sync byte not aligned, realigning stream (0 // 104)
2018-02-01 15:07:32 [22040] TS Sync byte not aligned, realigning stream (268 // 104)

mediasrv.log während VLC Stream über TVHeadend, bei einer Aufnahme sieht es genauso aus:
2018-02-01 15:31:45 [22040] Setting Frequency: 1597000
2018-02-01 15:31:45 [22040] Frequency: 1597
2018-02-01 15:31:45 [22040] Symbolrate: 22000
2018-02-01 15:31:45 [22040] Checking lock
2018-02-01 15:31:45 [22040] Checking lock
2018-02-01 15:31:45 [22040] Checking lock
2018-02-01 15:31:45 [22040] Checking lock
2018-02-01 15:31:45 [22040] Checking lock
2018-02-01 15:31:45 [22040] Frontend has locked
2018-02-01 15:31:52 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:31:52 [22040] TS Sync byte not aligned, realigning stream (0 // 172)
2018-02-01 15:31:58 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:31:58 [22040] TS Sync byte not aligned, realigning stream (0 // 84)
2018-02-01 15:32:10 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:32:10 [22040] TS Sync byte not aligned, realigning stream (0 // 116)
2018-02-01 15:32:10 [22040] TS Sync byte not aligned, realigning stream (241 // 116)
2018-02-01 15:32:28 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:32:28 [22040] TS Sync byte not aligned, realigning stream (0 // 124)
2018-02-01 15:32:58 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:32:58 [22040] TS Sync byte not aligned, realigning stream (0 // 160)
2018-02-01 15:33:02 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:33:02 [22040] TS Sync byte not aligned, realigning stream (0 // 160)
2018-02-01 15:33:36 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:33:36 [22040] TS Sync byte not aligned, realigning stream (0 // 108)
2018-02-01 15:34:30 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:34:30 [22040] TS Sync byte not aligned, realigning stream (0 // 20)
2018-02-01 15:34:30 [22040] TS Sync byte not aligned, realigning stream (260 // 20)
2018-02-01 15:34:54 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:34:54 [22040] TS Sync byte not aligned, realigning stream (0 // 76)
2018-02-01 15:35:12 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:35:12 [22040] TS Sync byte not aligned, realigning stream (0 // 20)
2018-02-01 15:35:12 [22040] TS Sync byte not aligned, realigning stream (189 // 20)
2018-02-01 15:36:14 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:36:14 [22040] TS Sync byte not aligned, realigning stream (0 // 168)
2018-02-01 15:36:36 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:36:36 [22040] TS Sync byte not aligned, realigning stream (0 // 116)
2018-02-01 15:36:58 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:36:58 [22040] TS Sync byte not aligned, realigning stream (0 // 152)
2018-02-01 15:36:58 [22040] TS Sync byte not aligned, realigning stream (208 // 152)
2018-02-01 15:37:40 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:37:40 [22040] TS Sync byte not aligned, realigning stream (0 // 28)
2018-02-01 15:37:40 [22040] TS Sync byte not aligned, realigning stream (252 // 28)
2018-02-01 15:38:18 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:38:18 [22040] TS Sync byte not aligned, realigning stream (0 // 128)
2018-02-01 15:39:01 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:39:01 [22040] TS Sync byte not aligned, realigning stream (0 // 108)
2018-02-01 15:39:45 [22040] Resetting TS Port FE1 (1)
2018-02-01 15:39:45 [22040] TS Sync byte not aligned, realigning stream (0 // 180)
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: Sundtek am Februar 01, 2018, 06:11:28 Nachmittag
Hallo,

versuche den Tuner auf isochronous umzustellen

Ursache des Problems:
Das System liest die USB Daten nicht schnell genug vom Tuner.

1. stoppe alle Applikationen welche auf den Tuner zugreifen
2. führe folgenden Befehl aus:
/opt/bin/mediaclient --transfermode=iso -d /dev/dvb/adapter0/frontend0
3. stecke den Tuner neu an und schau ob es noch immer Aussetzer gibt.


Ich denke das Problem könnte eventuell der CPU-Scheduler von dem System sein das dort irgendetwas nicht passt, mit Isochronous kann man dem eventuell entgegenwirken.
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: viper4st am Februar 01, 2018, 10:22:46 Nachmittag
Erst einmal danke für die schnelle Hilfe.
Leider macht es das noch schlimmer als vorher.
Der mediasrv Dienst läuft durchgängig mit ca. 30% Last auf einem Core, aber es kommt gar kein Bild mehr zu Stande.

im mediasrv.log sieht man nur noch:
2018-02-01 21:11:18 [22040] Setting Frequency: 1587500
2018-02-01 21:11:18 [22040] Frequency: 1587
2018-02-01 21:11:18 [22040] Symbolrate: 27500
2018-02-01 21:11:18 [22040] Checking lock
2018-02-01 21:11:18 [22040] Frontend has locked
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
2018-02-01 21:11:19 [22040] TS Sync byte not aligned, realigning stream (0 // 0)
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: Sundtek am Februar 02, 2018, 05:12:57 Vormittag
Dort gibt's nen Linux Kernelbug auf dem System (hat mit uns nichts zu tun), hast Du die Möglichkeit uns remote Zugang geben zu können? z.B ssh?

Die Rockchip oder Odroid(mit Broadcom Chipsätzen) Systeme sind dafür besser geeignet (wobei Rockchip keinen ordentlichen Codec Support bietet, bei HD also mit Vorsicht zu genießen ist)

Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: viper4st am Februar 02, 2018, 09:22:41 Vormittag
Ich habe dir eine PM geschickt.

Gibt es denn mehr Informationen zu diesem Kernelbug?
Oder ist das prinzipiell ein Problem mit dem alten 3.14er Kernel. Für die AMlogic CPUs scheint es kein LibreElec mit neuerem Kernel zu geben.
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: viper4st am Februar 07, 2018, 08:06:25 Vormittag
Gibt es zu dem Kernelbug irgendwelche Informationen?
Bisher kam noch keine Antwort und auch auf meine private Mitteilung kam keine Reaktion.
Titel: Re:Tvheadend - Sporadische Aussetzer
Beitrag von: viper4st am Juni 05, 2018, 08:28:17 Vormittag
Gibt es hier irgendwelche Neuigkeiten?
Titel: Re: Tvheadend - Sporadische Aussetzer
Beitrag von: StarDuddle am November 02, 2020, 09:44:38 Nachmittag
Gibt es zu diesem Problem eine lösung, die hier geposted werden kann?

Vielen Dank
Titel: Re: Tvheadend - Sporadische Aussetzer
Beitrag von: Sundtek am November 03, 2020, 10:35:17 Vormittag
Bezüglich den Amlogic Boards mit SkyTV 6 gibt es zur Zeit keine weiteren Informationen

SkyTV 3 gab es bis ca. 2015
SkyTV 6 gab es bis ca. August 2018
SkyTV 8 gibt es seit ca. Oktober 2018

Die Tuner verwenden jeweils unterschiedliche Chipsätze, welche sich auch unterschiedlich verhalten.

SkyTV 8 und SkyTV Dual verwenden andere Chipsätze was das Problem eventuell lösen könnte.
SkyTV Dual hat zusätzlich einen sehr großen Puffer im FPGA um USB Jitter besser ausgleichen zu können

Das Problem bei dem betroffenen Amlogic Board wird durch einen Puffer-Überlauf im USB Chipsatz (SkyTV 4 - SkyTV 6) verursacht da der Host die DVB Daten nicht schnell genug abholt, oder genauer gesagt mit zu großem Jitter.
Wir haben dieses Problem auch bei FreeBSD bemerkt (dort scheint jedoch USB Stack mangelhaft zu sein, da das gleiche verwendete System mit Linux und Windows keine Probleme verursachte).

Was wir bei einigen Amlogic Boards bemerkt haben:
- Es funktioniert nur der OTG USB Port zuverlässig, andere USB Ports haben Daten verschluckt (auch bei USB Festplatten)

StarDuddle, von Deinem Problem fehlen aber Detailinformationen, wir wissen weder welches System du verwendest noch was Dein genaueres Problem ist.
Titel: Re: Tvheadend - Sporadische Aussetzer
Beitrag von: StarDuddle am November 03, 2020, 02:14:47 Nachmittag
Hallo Sundtek,

Vielen Dank für die Erleuterung der Situation.

Ich bitte um Entschuldigung, dass ich nicht sofort mein Equipment genannt habe.
Im März 2017 habe ich den Sundtek SkyTV Ultimate 6 2016 (DVB-S/S2) Stick von euch bekommen. Diesen habe ich auf meinem Radpberry Pi 2b+ erfolgreich installiert und konnte damit flüssig TV konsumieren.
Nach dem Upgrade auf den RaPi 4 mit dem aktuelle  Libreelec und dem Sundtek SkyTV Ultimate 6 2016 (DVB-S/S2) ist dieses jedoch nicht mehr möglich gewesen.

Ist denn noch möglich mit dem RaPi 4 und dem Sky TV 6 flüssig TV zu empfangen? Ggf. Einen anderen USB Port verwenden?

Besten Dank
Titel: Re: Tvheadend - Sporadische Aussetzer
Beitrag von: Sundtek am November 03, 2020, 03:22:10 Nachmittag
Werde Deinen Beitrag etwas später absplitten, da der RPI4 was anderes ist.

Überprüfe mal die Signalstärke bei den Sendern die Deiner Ansicht nach nicht flüssig laufen.
/opt/bin/mediaclient --readsignal=0 -d /dev/dvb/adapter0/frontend0
Die BER (Bit Error Rate) sollte 0 sein.

Handelt es sich um HD oder SD Sender?

Es muss erst mal identifiziert werden ob Dein Problem wirklich mit dem Empfang zu tun hat oder ein Codec Problem ist.

Der Treiber funktioniert genau gleich auf dem RPI2, 3 und 4.