Sundtek Support Forum

English => Dreambox Settopbox => Thema gestartet von: Dima73 am November 26, 2015, 07:09:42 Nachmittag

Titel: Signal Quality DVB-T
Beitrag von: Dima73 am November 26, 2015, 07:09:42 Nachmittag
box et8500

NIM Socket 4:
        Type: DVB-T
        Name: Sundtek DVB-T (III) (0/0) (USB)
        Frontend_Device: 4
        Has_Ouput: no
        I2C_Device: 11
frequencies  Signal Quality

474000  7% (> 100?)   
490000  84%
514000  86%
570000 0%(> 100?)
586000  99% - 0%(> 100?)
618000  92%

This is the wrong values.

In fact, if the value is less than 70% video does not work (low signal).
That's right, divided into two.

It can be fixed?

Titel: Re:Signal Quality DVB-T
Beitrag von: Sundtek am November 26, 2015, 07:54:11 Nachmittag
Sure, those values are a little bit relatively, the CNR is more important.

can you join http://chat.sundtek.de so we can get the input values which you receive from the tuner?
Titel: Re:Signal Quality DVB-T
Beitrag von: Sundtek am November 26, 2015, 10:02:20 Nachmittag
Thanks!

will be updated with the next version in 30 Minuten.

Edit:
the driver is updated.
Titel: Re:Signal Quality DVB-T
Beitrag von: Dima73 am November 27, 2015, 10:00:28 Vormittag
Thanks!

will be updated with the next version in 30 Minuten.

Edit:
the driver is updated.
Thanks for a quick decision, but...
I check out the new driver:

now
474000  96-98%   
490000  84%
514000  86%

need
474000  43-44%   
490000  42%
514000  43%

Titel: Re:Signal Quality DVB-T
Beitrag von: Sundtek am November 28, 2015, 01:56:46 Vormittag
Hi,

the scale is different for those tuners, it looks absolutely okay now to me.
Every chipset might report different quality levels there's no "standard".
What shows up as 40% for you right now with your other tuner might show up as 60% with another tuner chipset.

A detailed value would be the CNR, but enigma2 does not use it.
Titel: Re:Signal Quality DVB-T
Beitrag von: Dima73 am November 28, 2015, 12:17:24 Nachmittag
Now the value exactly twice more.
It's easy to fix.